User's Manual

ManualsBrandsGetac Technology ManualsElectronicsT800-UHF V3.0

User Manual

System Overview

TM-915 is designed of 902MHz to 928MHz reader module for UHF RFID, usually

applied to PC . Our advance technology delivers small, reliable, easy to design and

cost-effective EPC C1G2 UHF reader module solution. TM-915 also compatible with

ISO-18000-6C. Its simplified Uart interface, low power consumption and high

performance, make it easily to integrate any device with UHF technology.

PC system: Windows XP/Vista/7/8 (32 & 64-bit)

 USB to UART driver

 Above Net_Framework_4.0

 FAVEPC Reader Utility software

1. First install PL2303_Prolific_DriverInstaller_v1_12_0 file. The file download Web

side refer to the below

http://www.prolific.com.tw/UserFiles/files/PL2303_Prolific_DriverInstaller_v1_14_0.zip

2. Install process:

Step 1: Next

Summary of content (10 pages)

PAGE 1
User Manual System Overview TM-915 is designed of 902MHz to 928MHz reader module for UHF RFID, usually applied to PC . Our advance technology delivers small, reliable, easy to design and cost-effective EPC C1G2 UHF reader module solution. TM-915 also compatible with ISO-18000-6C. Its simplified Uart interface, low power consumption and high performance, make it easily to integrate any device with UHF technology. PC system: Windows XP/Vista/7/8 (32 & 64-bit)  USB to UART driver  Above Net_Framework_4.
PAGE 2
Step 2: Finish and PC restart 3. Install the above Net_Framework_4.0 file，The file download Web side refer to the below https://www.microsoft.com/zh-tw/download/details.aspx?id=17718 4. USB Reader plug to PC USB port and Run Reader Utility software，refer to the below: Check the box【Enter Reader】and Enter the operating window.
PAGE 3
Operating command refers to the below: 1.1 Q command： Read EPC data from single TAG. Check the box【EPC(Q)】. It can read TAG EPC data. If it need continue to read single TAG. First check the box【Cont.】and check the box【EPC(Q)】again. Check the box【STOP】. It stops to read the TAG EPC. 1.2 U command Read many EPC data from multi-TAG. First check the box【Multi】 and check the box【EPC(U)】 If it need continue to read Multi-TG. First check the box【Cont.】and【Multi】, check the box【EPC(U)】.
PAGE 4
check the box【STOP】. It stops to read multi TAG. 1.3 【TID】button Real command is R2,0,4. It can see the real command in Info windows at lower right corner. The【TID】button is used to read single TAG. If it need continue to read single TAG, check the box【Cont.】 and check thebox【TID】. check the box【STOP】. It stops to read multi TAG. 1.4 R command (Read operation)： 1.4.
PAGE 5
1.6 Lock operation 1.6.1 Check the box from Kill pwd options. It can select four items. 1.6.1.1 【skip】：not change 1.6.1.2 【Readable and writable】：TAG can be Readable and writable 1.6.1.3 【Permanently Readable and writable】：TAG can be Permanently Readable and writable. It can’t be change the status after the setting. 1.6.1.4 【Need password to readable and writable】：TAG need password to readable and writable 1.6.1.
PAGE 6
*EPC data always can be read. 1.6.3.1 【skip】：not change 1.6.3.2 【Writable】：TAG can be writable 1.6.3.3 【Permanently writable】：TAG can be permanently writable. It can’t be change the status after the setting. 1.6.3.4 【Need password to writable】：TAG need password to writable 1.6.3.5 【Need password to permanently writable】：TAG need password to permanently writable. It can’t be change the status after the setting. 1.6.4 Check the box from TID bank options. It can select four items.
PAGE 7
1.6.5.4 【Need password to writable】：TAG need password to writable 1.6.5.5 【Need password to permanently writable】：TAG need password to permanently writable. It can’t be change the status after the setting 1.6.6 For example. We will select (Need password to readable and writable) option at all item. Check the box【Lock】. The result show in Info windows at lower right corner. If it is right, it show the L. 1.7 Kill Password Setting 1.7.
PAGE 8
result show in Info windows at lower right corner. If it is right, it show the W 1.9 P command: 1.9.1 The all operations are be locked the password. So we need use P command before the other command operates. 1.9.2 Write the password (12345678) at Access Password item 1.9.3 Check the box【Set access to pre-command】 1.9.4 We can read TAG to get the EPC data. 1.9.5 We can see the information in Info windows at lower right corner. The R command. It isn’t need the password to read EPC data.
PAGE 9
1.11.1 It need select one TAG operation at Multi-TAG. It need use the T Command to select specific TAG. 1.11.2 Check the box【Multi】first and check the box【EPC(U)】 1.11.3 It show the Multi-TAG data at Top right of the window 1.11.4 At Pre-setting item 1.11.4.1 Check the box【Set select to pre-command】 1.11.4.2 Select【01:EPC】at Memory Bank 1.11.4.3 Enter number(70) at Address(bit) *Warning : Address unit is bit, the value is HEX. So HEX(7*16)=HEX(112)=70 hex 1.11.4.
PAGE 10
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.