User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Computer
- Chapter 3 Managing Power
- Chapter 4 Expanding Your Computer
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Caring for the Computer
- Chapter 8 Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Resetting the Computer
- System Recovery
- Using the Driver Disc (Optional)
- Appendix A Specifications
- Appendix B Regulatory Information
99
Using the Driver Disc (Optional)
NOTE: You can download the latest drivers and utilities from
Getac website at http://www.getac.com
Support.
The Driver disc contains drivers and utilities required for specific hardware in your
computer.
Since your computer comes with drivers and utilities pre-installed, you normally do
not need to use the Driver disc. In case you want to manually install Windows,
you will have to install the drivers and utilities one by one after installing Windows.
To manually install drivers and utilities:
1. Start up the computer.
2. Insert the Driver disc. Make sure you use the disc that matches the Windows
version of your computer.
3. The autorun program should automatically start. You will see the installation menu.
Click NEXT to go to the next page if there is more than one.
4. To install a driver or utility, just click the particular button and follow the onscreen
instructions to complete the installation.