User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Computer
- Chapter 3 Managing Power
- Chapter 4 Expanding Your Computer
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Caring for the Computer
- Chapter 8 Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Resetting the Computer
- System Recovery
- Using the Driver Disc (Optional)
- Appendix A Specifications
- Appendix B Regulatory Information
14
Ref
Component
Description
P1
Toggles the “Blackout” mode on or off.
Brings up the ECO menu for selecting a power profile
when using battery power.
Toggles the sunlight-readable mode on or off.
Enables or disables light sensor.
Power Button
Turns the power on or off. (The default “off”
state is
“Sleep mode.”)
Stylus
(option)
Serves as the input device by tapping
on the screen to
make selections and enter information.
Touchpad
Serves as the pointing device of the computer.
Indicators
Show the current status of the computer’s devices.
Hard Disk Drive
/ DVD Drive
Blinks green when computer is
accessing the hard disk
or DVD drive.
Card Reader
Blinks green when computer is accessing the storage
card.
Caps Lock
Lights green when Caps Lock is on.
Num Lock
Lights green when Num Lock is on.
Lights amber when the optional hard disk heater is on.
Microphone
Receives sound and voice for the computer.
Keyboard
Serves as the data input device of the computer.
Fingerprint
Scanner
Serves as the fingerprint verification, preventing
unauthorized access to your computer.
Stereo Speaker
Sends out sound and voice from the computer.
Indicators
Show the current status of the computer’s devices.