User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Computer
- Chapter 3 Managing Power
- Chapter 4 Expanding Your Computer
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Caring for the Computer
- Chapter 8 Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Resetting the Computer
- System Recovery
- Using the Driver Disc (Optional)
- Appendix A Specifications
- Appendix B Regulatory Information
55
5. Close the cover.
Using Storage Cards
NOTE: You can use only storage cards. Your Card Reader does not
support cards with I/O (input/output) functions such as a
wireless network card or Bluetooth card.
Your computer has a storage card reader. The card reader is a small drive for
reading from and writing to removable storage cards (or called memory cards).
The reader supports SD (Secure Digital) cards.
To insert a storage card:
1. Locate the SD card reader on the right side of the computer and open the
cover.
2. Align the card with its connector pointing to the slot and its label facing down.
Slide the card into the slot until it reaches the end.
3. Windows will detect the card and assign it a drive name.
To remove a storage card:
1. Open
File Explorer
and click
Computer
.
2. Right-click the drive with the card and select
Eject
.
3. Slightly push the card to release and then pull it out of the slot.