User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Computer
- Chapter 3 Managing Power
- Chapter 4 Expanding Your Computer
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Caring for the Computer
- Chapter 8 Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Resetting the Computer
- System Recovery
- Using the Driver Disc (Optional)
- Appendix A Specifications
- Appendix B Regulatory Information
57
Changing or Replacing
System Memory Upgrade
You can upgrade your computer by expanding system memory.
CAUTION:
It is not recommended that you buy and install RAM modules
by yourself. If you want to expand system memory, please ask
Getac service center to install DRAM modules for you so that
full compatibility can be guaranteed.
RAM modules are extremely sensitive to static electricity.
There are cases where static electricity generated by the
human body has adversely affected such modules. When
inserting or removing a RAM module, do not touch the
terminals or internal components, insert objects other than
the module, or allow foreign particles to enter. Doing so
has been known to cause damage, fire, or electrical shock.
To install the RAM module:
1. Disconnect the AC adapter and remove the battery pack (see chapter 3).
2. Carefully place the computer upside down.
3. Remove the six screws to open the compartment cover.