User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Computer
- Chapter 3 Managing Power
- Chapter 4 Expanding Your Computer
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Caring for the Computer
- Chapter 8 Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Resetting the Computer
- System Recovery
- Using the Driver Disc (Optional)
- Appendix A Specifications
- Appendix B Regulatory Information
60
Replacing the Hard Disk Drive
1. Disconnect the AC adapter and remove the battery pack (see chapter 3).
2. Locate the hard disk drive compartment on the right side of the computer. Slide
the cover lock to the left (
) and then lift the release latch (
) to open
the compartment cover.
3. Pull the strip and slide the hard disk drive out of the slot.
4. With the strip facing outward, insert the new hard disk drive all the way into
the slot.
5. Close the cover, press the release latch downward to engage, and then slide
the lock towards the right to secure the cover.
6. Replace the battery pack.