User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Computer
- Chapter 3 Managing Power
- Chapter 4 Expanding Your Computer
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Caring for the Computer
- Chapter 8 Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Resetting the Computer
- System Recovery
- Using the Driver Disc (Optional)
- Appendix A Specifications
- Appendix B Regulatory Information
61
Installing a Secondary Battery Pack or Hard Disk
Drive
You can purchase a secondary battery pack or hard disk drive to be installed in
the multi-purpose bay.
1. Make sure that system power is off.
2. Open the multi-purpose bay cover by sliding the release latch towards the left.
3. Press upward the release latch (
) and pull the ribbon strip (
) to slide
the existing device out of the bay.