User's Manual

66
Lock does not work. In this case, you can still press Fn + a letter key to enter
a number.
Advanced Menu
The Advanced menu contains the advanced settings.

CD/DVD Auto Power Control
sets if power to the CD/DVD drive is controlled for
energy saving. When set to
ZPODD (Zero Power Optical Disc Drive), power
will not be supplied to the drive when there is no CD/DVD in the drive. When
set to
ODD Door , power will not be supplied to the drive when there is no
CD/DVD in the drive and the protective door of the drive is closed.

Wake Up Capability
specifies events for waking up the system from S3 (Sleep)
state.
Any-key Wake Up From S3 allows any key to wake up the system from S3 (Sleep)
state.
USB Wake-Up From S3 allow a USB device activity to wake up the system from
S3 (Sleep) state.

System Policy
sets the system performance. When set to Performance , the CPU
always runs at full speed. When set to
Balance , the CPU speed changes
according to the current workload, therefore balancing between performance and
power consumption.

AC Initiation
sets if connecting AC power will automatically start or resume the
system.

SATA Mode
set to AHCI if your hard disk supports AHCI. AHCI allows you to
take advantage of Advanced Host Controller Interface features. The options are
IDE
and AHCI .
CAUTION: Incorrect SATA mode settings can result in hard disk
drive boot failure.

Active Management Technology Support
(This item appears only on models
supporting vPro.)
Intel AMT Support enables or disables Intel® Active Management Technology BIOS