User's Manual

68
 Using this feature will reinstall Windows to your system and
configure it to the system’s factory default settings. All
data on the hard disk drive will be lost.
 Make sure that power is not interrupted during the recovery
process. An unsuccessful recovery may result in Windows
startup problems.
 Windows RE launches Windows Recovery Environment. Windows RE (Windows
Recovery Environment) is a recovery environment that provides recovery, repair,
and troubleshooting tools in Windows 10.
Security Menu
The Security menu contains the security settings, which safeguard your system against
unauthorized use.
NOTE:
 You can set the user password only when the supervisor
password has been set.
 If both the administrator and user passwords are set, you
can enter any of them for starting up the system and/or
entering BIOS Setup. However, the user password only allows
you to view/change the settings of certain items.
 A password setting is applied right after it is confirmed.
To cancel a password, leave the password empty by pressing
the Enter key.

Set Supervisor/User Password
sets the supervisor/user password. You can set
the supervisor/user password to be required for starting up the system and/or
entering BIOS Setup.

Password on Boot
allows you to enable or disable the entering of password for
booting up your system.

Set HDD 0 Password
sets the password for locking the Primary Master hard disk
drive. After setting a password, the hard disk drive can only be unlocked by
the password no matter where it is installed.