User's Manual

Navigating on the Screen

Navigating on the ScreenNavigating on the Screen

Navigating on the Screen

The screen of your Tablet PC is touch-sensitive. You can control the location of

the cursor/pointer on the screen using the included stylus or your finger to

communicate with the Tablet PC.

CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the

touchscreen. Doing so may damage the touchscreen surface. Use the included

stylus or your finger.

NOTE: An optical film has been attached to the screen before shipment. The film

is a consumable, which will be worn out by possible scratches. You can purchase

a new one when replacement is required.

Using the Touchscreen

Using the TouchscreenUsing the Touchscreen

Using the Touchscreen

Your Tablet PC has a capacitive touchscreen. This type of touchscreen responds

to objects that have conductive properties, such as fingertips and a

capacitive-tipped stylus.

You can change the touchscreen sensitivity settings to suit your scenario.

Double-tap the Touch Screen Mode shortcut on Windows desktop to open the

settings menu and select one of the options (as shown below).

NOTE:

 In high temperatures (above 60

C / 140 °F), set the mode to Touch instead of

Glove or Pen mode.

 If liquid is spilled on the touchscreen causing a wet area, the area will stop

responding to any inputs. For the area to function again, you must dry it.

Select this if you are using the

stylus. (You must use the one

supplied with your model.)

Select this if you are wearing gloves (referring

to warm gloves or work gloves, not referring to

touchscreen-capable gloves).

Select this if you prefer using

fingertips. Also, select

this when

raindrops are falling

on the screen and should be

rejected as input.