User's Manual

Using the

Using the Using the

Using the NFC/RFID Reader

NFC/RFID ReaderNFC/RFID Reader

NFC/RFID Reader

(Optional)

(Optional)(Optional)

(Optional)

The NFC/RFID reader can read data from NFC (Near Field Communication) and

RFID (Radio Frequency Identification) tags. It supports ISO 14443 A/B, MIFARE,

ISO 15693, and ISO 18000-3 standards.

The NFC/RFID reader is enabled by default. To enable or disable the reader, run

the BIOS Setup program and select Advanced  Device Configuration  RFID Card

Reader. (See Chapter 6 for information on BIOS Setup.)

For optimal results when reading an NFC/RFID tag, have the tag face the antenna

in the same orientation as indicated by the icon on the exterior of the Tablet PC.

NOTE:

 When not using an NFC/RFID card, do not leave it within or near the antenna

area.

 For enhanced applications and customization of the module, contact your

authorized Getac dealer.

 The NFC reader requires specialized applications. For further information, ask

your system administrator.

 The tablet models with this option do not comply with ENERGY STAR

RFID antenna