User's Manual

76
Using
Using Using
Using Recovery Partition
Recovery PartitionRecovery Partition
Recovery Partition
When necessary, you can restore your Windows 10 system to the factory default
state by using the “recovery partition” feature. Recovery partition is a portion of
your hard disk drive that is set aside by the manufacturer to hold the original image
of your system.
WARNING:
 Using this feature will reinstall Windows to your system and configure it to the
system’s factory default settings. All data on the hard disk drive will be lost.
 Make sure that power is not interrupted during the recovery process. An
unsuccessful recovery may result in Windows startup problems.
To restore your system to the factory default state:
4. Connect the AC adapter.
5. Run BIOS Setup Utility. Select Advanced  Recovery Partition. (See Chapter 6
for more information.)
6. Follow the onscreen instructions to complete the process.