User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Tablet PC
- Chapter 3 Managing Power
- Chapter 4 Expanding Your Tablet PC
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Care and Maintenance
- Chapter 8 Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Resetting the Tablet PC
- System Recovery
- Using the Driver Disc (Optional)
- Appendix A Specifications
- Appendix B Regulatory Information
30
Using the NFC/RFID Reader (Optional)
The NFC/RFID reader can read data from NFC (Near Field Communication) and RFID
(Radio Frequency Identification) tags.
The NFC/RFID reader is enabled by default. To enable or disable the reader, run the
BIOS Setup program and select Advanced Device Configuration RFID Card Reader.
(See Chapter 5 for information on BIOS Setup.)
For optimal results when reading an NFC/RFID tag, have the tag face the antenna in the
same orientation as indicated by the icon on the exterior of the Tablet PC. The icon
indicates where the RFID antenna is located. The location depends on your model.
NOTE:
When not using an NFC/RFID card, do not leave it within or near the antenna area.
For enhanced applications and customization of the module, contact your
authorized Getac dealer.
The NFC reader requires specialized applications. For further information, ask your
system administrator.
The tablet models with this option do not comply with ENERGY STAR
®
.
RFID antenna
or