User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Tablet PC
- Chapter 3 Managing Power
- Chapter 4 Expanding Your Tablet PC
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Care and Maintenance
- Chapter 8 Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Resetting the Tablet PC
- System Recovery
- Using the Driver Disc (Optional)
- Appendix A Specifications
- Appendix B Regulatory Information
41
Connecting a USB Device with Fischer Connectors
(Optional)
Select models have one or two USB connectors of DBPU 7 pin type, which is a Fischer
push-pull locking system. You can connect a USB device supporting this type of
connection. Typical applications are military and security services.
1. Align the dot on the cable with the dot on the Tablet PC.
2. Push the outer sleeve and then plug the connector.
Once connected, a special locking mechanism will prevent accidental disconnection. To
disconnect, push the outer sleeve to unlock and then pull the connector out.
Connecting an Audio Device
The audio combo connector is the “4-pole TRRS 3.5mm” type (Apple iPhone Recessed)
so you can connect a compatible headset microphone.
SAFETY WARNING:
To prevent possible hearing damage, do not listen at high volume levels for long
periods.
Outer sleeve