User's Manual

50
When and How to Use
NOTE:
 The actual setting items on your model may differ from those described in this
chapter.
 The availability of some setting items depends on the Windows version your
computer is running.
You need to run BIOS Setup Utility when:
 You see an error message on the screen requesting you to run BIOS Setup Utility.
 You want to restore the factory default BIOS settings.
 You want to modify some specific settings according to the hardware.
 You want to modify some specific settings to optimize the system performance.
To run BIOS Setup Utility:
Method 1: During system startup when the logo screen appears, tap the screen or press
the Windows Logo button on your Tablet PC. In the pre-boot menu that appears, select
Setup Utility. (Tap with your finger. Stylus is not supported here.)
NOTE:
 If you don’t want any accidental tapping to invoke the pre-boot menu, you can
disable this method by setting the “Screen Tapping for Boot Options” item in the
BIOS Setup Utility.
 When tapping the screen for operating BIOS Setup, use your finger. The touching
of a stylus tip is not supported in this situation.
 For Windows 10 models, the time period in which you can use the above method is
extremely short. You can use the other method as described below.
Method 2 (for Windows 10 models only): Tap  Settings  Update & security 
Recovery. Under Advanced startup, tap Restart now. In the boot options menu, tap
Troubleshoot  Advanced options  UEFI Firmware Settings. Tap Restart. In the
pre-boot menu that appears, select Setup Utility.
Method 2 (for Windows 7 models only): If a keyboard is connected, press the F2 key
when the prompt (“Press F2 for System Utilities”) appears at the bottom left corner of
the screen during system startup.