User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Tablet PC
- Chapter 3 Managing Power
- Chapter 4 Expanding Your Tablet PC
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Care and Maintenance
- Chapter 8 Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Resetting the Tablet PC
- System Recovery
- Using the Driver Disc (Optional)
- Appendix A Specifications
- Appendix B Regulatory Information
77
Resetting the Tablet PC
You may have to reset (reboot) your Tablet PC on some occasions when an error occurs
and the program you are using hangs up.
If you are sure the operation has stopped and you cannot use the “restart” function of
the operating system, reset the Tablet PC.
Reset the Tablet PC by any one of these methods:
Press and hold the P2 button for more than 2 seconds. This opens the Ctrl-Alt-Del
screen where you can select actions including Restart.
If the above action does not work, press and hold the power button for more than
5 seconds to force the system to turn off. Then turn on the power again.