User's Manual

28
Replacing the Battery Pack
CAUTION:
 There is danger of explosion if the battery is incorrectly replaced.
Replace the battery only with the Tablet PC manufacturer’s battery
packs. Discard used batteries according to the dealer’s instructions.
 Do not attempt to disassemble the battery pack.
NOTE:
 You can hot swap the battery pack if your model has the bridge battery.
 If you have the high capacity battery model, the battery pack looks
different from the one shown here. The removal and installation
method is the same.
To replace the battery pack, follow these steps:
1. Turn off the Tablet PC and disconnect the AC adapter.
Skip this step if you are hot swapping the battery pack. (See “Hot
Swapping the Battery Pack (Optional)” for more information.)
2. Slide the lock of the battery release latch to the unlocked position.
3. Slide the battery release latch. The battery pack will slightly pop up.
Remove the battery pack from its compartment.
4. Fit another battery pack into place. With the battery pack correctly
oriented, attach its connector side to the battery compartment at an
angle and then press down the other side). The battery release latch
should automatically engage.
5. Slide the lock of the battery release latch to the locked position.
CAUTION: Make sure the latch is correctly locked, not revealing the
underneath red part.