UX10 USER MANUAL Rugged Mobile Computing Solutions
April 2019 TRADEMARKS All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice. For the latest version of the manual, please visit the Getac website at www.getac.com.
Table of Contents Chapter 1 Getting Started................................................................. 1 Getting the Tablet PC Running ................................................. 2 Installing the Battery Pack .................................................... 2 Installing the Micro-SIM Card (Optional) ............................. 2 Connecting to AC Power ....................................................... 3 Turning On and Off the Tablet PC .......................................
Hot Swapping the Battery Pack (Optional) ....................... 29 Power-Saving Tips .................................................................... 30 Appendix A Specifications ................................................................. 31 Appendix B Regulatory Information ................................................. 33 On the Use of the System ........................................................ 34 Class B Regulations ..............................................................
Chapter 1 Getting Started This chapter first tells you step by step how to get the Tablet PC up and running. Then, you will find a section briefly introducing the external components of the Tablet PC.
Getting the Tablet PC Running Installing the Battery Pack 1. With the battery pack correctly oriented, attach its connector side to the battery compartment at an angle and then press down the other side. The battery release latch should automatically engage. 2. Slide the lock of the battery release latch to the locked position. CAUTION: Make sure the latch is correctly locked, not revealing the underneath red part. Installing the Micro-SIM Card (Optional) 1. Locate the micro-SIM card slot.
Connecting to AC Power CAUTION: Use only the AC adapter included with your Tablet PC. Using other AC adapters may damage the Tablet PC. NOTE: The battery pack is shipped to you in power saving mode that protects it from charging/discharging. It will get out of the mode to be ready for use when you install the battery pack and connect AC power to the Tablet PC for the very first time. When the AC adapter is connected, it also charges the battery pack.
Turning On and Off the Tablet PC Turning On Press the power button ( ) for at least 2 seconds until the Power Indicator lights up. The Windows operating system should start. NOTE: By default, there is 2-second delay time for the power button. You can change the setting with the “Power Button Delay” item in the BIOS Setup Utility. Tapping the screen during startup may invoke a pre-boot menu (unless the default settings have been changed). If the menu appears, simply select Continue.
Identifying Hardware Components NOTE: Depending on the model you purchased, the appearance of your Tablet PC may not be exactly the same as those shown in this manual. CAUTION: You need to open the protective covers to access the connectors. When not using a connector, make sure to close the cover completely for water- and dust-proof integrity. (Engage the locking mechanism if existing.) Front Components Ref Component Description Camera cover Camera indicator Lights up when the camera is in use.
Ref Component Description IR sensor (optional) Detects the infrared energy of objects to form an image. The sensor flashes red light when in use. The near infrared (IR) imaging capability allows you to use Windows Hello face authentication. Camera lens Allows you to use the camera function. Touchscreen Displays and receives information for the Tablet PC. Light sensor Detects the surrounding lighting condition for automatic adjustment of the LCD brightness.
Ref Component Description Speaker Sends out sound and voice from your Tablet PC. Microphone Receives sound and voice to record voice. Indicators Power Lights blue when the power is on. Blinks blue when the system is in Sleep mode. Battery Lights amber when the battery is being charged. Lights green when battery charging is completed. Blinks green to indicate the battery’s built-in high temperature protection mechanism is activated.
Rear Components 8
Ref Component Description Flash Provides extra light when taking pictures. Camera lens Allows you to use the camera function. When the camera lens is in use, the indicator beside it lights up. Stylus holder Holds the stylus. Security lock Locks the battery release latch. Battery release latch Releases the battery pack. Battery pack Supplies power to your Tablet PC when external power is not connected.
Ref Component Description e UHF RFID Reads data from UHF RFID tags. reader module f HID RFID Reads data from HID RFID tags. reader module g Bridge battery module Provides enough extra power for the purpose of hot swapping the battery pack. Right-Side Components Ref Component Kensington lock Description Locks the Tablet PC to a stationary object for security.
Ref Component Description HDMI connector Connects a HDMI monitor or TV set. USB 3.1 port Connects a USB device. This port supports Service Diagnostic UART Mode. Combo audio connector Connects a set of headphones or external speakers with amplifier. Supports a headset microphone with 4-pole TRRS 3.5mm jack. Power connector Connects the AC adapter.
Top Components 12
Ref Component Description a None Or can be one of the below components depending on your model: b Barcode reader Scans and reads barcodes. lens c RFID reader Reads data from RFID tags. d USB 3.0 port Connects a USB device. e USB 3.0 Type-C Connects a USB device that supports USB Type-C port connection. f RS232 serial connector Connects a serial device. g VGA connector Connects an external display monitor. h RJ-45 connector Connects the LAN cable.
Chapter 2 Operating Your Tablet PC This chapter provides information about the use of the Tablet PC. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your Tablet PC. CAUTION: Do not expose your skin to the Tablet PC when operating it in a very hot or cold environment. The Tablet PC can get uncomfortably warm when you use it in high temperatures.
Navigating on the Screen The screen of your Tablet PC is touch-sensitive. You can operate the Tablet PC by touching the screen with your finger or the stylus. CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the touchscreen. Doing so may damage the touchscreen surface. NOTE: An optical film has been attached to the screen before shipment. The film is a consumable, which will be worn out by possible scratches. You can purchase a new one when replacement is required.
The following table shows how you use the touchscreen to obtain equivalent mouse functions. Equivalent Mouse Function Term/Action Tap: Touch the screen once. Click/Point Double-tap: Touch the screen twice rapidly. Double-click Tap and hold: Tap and hold until a popup menu appears. Right-click Drag: Hold the stylus (or finger) on the screen and drag across the screen until reaching your destination.
Gestures ( Actions = finger down; = finger up) Rotate or Move two fingers in opposing directions. -orUse one finger to pivot around another. Press and Tap Descriptions Use rotating to move a picture or other item on the screen in a circular direction (clockwise or counterclockwise). The gesture works in applications that support the specific gesture. Use press and tap to access the shortcut menu. Press on target and tap using a second finger.
Using the Dual Mode Display (Optional) Dual mode display (if your model has the feature) incorporates both touchscreen and digitizer functions. The display is set to Touchscreen mode by default. Touchscreen mode provides all the functionalities that an ordinary touchscreen has. When the Tablet PC receives signals from the digitizer pen, the display automatically switches to Digitizer mode.
Using Network and Wireless Connections Using the LAN (Optional) Select models have the LAN module. To connect the network cable to the LAN module, connect one end of the LAN cable to the RJ-45 connector on the Tablet PC and the other end to the network hub. Using the WLAN The WLAN (Wireless Local Area Network) module of your Tablet PC supports IEEE 802.11a/b/g/n/ac. Turning On/Off the WLAN Radio To turn on the WLAN radio: Select Settings Network & Internet Wi-Fi.
Connecting to a WLAN Network 1. Make sure that the WLAN function is enabled (as described above). 2. Select the network icon in the lower right of the task bar. 3. Select the device you want to connect from the search results. 4. Some networks require a network security key or passphrase. To connect to one of those networks, ask your network administrator or Internet service provider (ISP) for the security key or passphrase.
2. Make sure that the target Bluetooth device is turned on, discoverable and within close range. (See the documentation that came with the Bluetooth device.) 3. Select Settings Devices Bluetooth. 4. Select the device you want to connect from the search results. 5. Depending on the type of Bluetooth device that you want to connect to, you will need to enter the pertinent information. For detailed information on using the Bluetooth feature, see Windows’ online Help.
Setting up a WWAN Connection Tap Settings Network & Internet Cellular. (For detailed information on cellular settings in Windows 10, see Microsoft Support website.
Chapter 3 Managing Power Your Tablet PC operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.
AC Adapter CAUTION: The AC adapter is designed for use with your Tablet PC only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your Tablet PC is for use in the country where you purchased your Tablet PC. If you plan to go overseas with the Tablet PC, consult your dealer for the appropriate power cord. When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the Tablet PC.
Battery Pack The battery pack is the internal power source for the Tablet PC. It is rechargeable using the AC adapter. NOTE: Care and maintenance information for the battery is provided in the “Battery Pack Guidelines” section in Chapter 7. Charging the Battery Pack NOTE: Charging will not start if the battery’s temperature is outside the allowed range, which is between 0 °C (32 °F) and 50 °C (122 °F). Once the temperature meets the requirements, charging automatically resumes.
Initializing the Battery Pack You need to initialize a new battery pack before using it for the first time or when the actual operating time of a battery pack is much less than expected. Initializing is the process of fully charging, discharging, and then charging. It can take several hours. The G-Manager program provides a tool called “Battery Recalibration” for the purpose. Checking the Battery Level NOTE: Any battery level indication is an estimated result.
Battery Low Signals and Actions The battery icon changes appearance to display the current state of the battery. Battery Icon Battery Level Description Discharging The icon shows the charge remaining in 10-percent increments until the charge reaches the low-battery level. Low The battery charge has reached the low-battery level. Critically low The battery charge has reached the critical battery level. By default, Windows will display a notification and put your Tablet PC into Hibernation.
Replacing the Battery Pack CAUTION: There is danger of explosion if the battery is incorrectly replaced. Replace the battery only with the Tablet PC manufacturer’s battery packs. Discard used batteries according to the dealer’s instructions. Do not attempt to disassemble the battery pack. NOTE: You can hot swap the battery pack if your model has the bridge battery. If you have the high capacity battery model, the battery pack looks different from the one shown here.
Hot Swapping the Battery Pack (Optional) If your model has the bridge battery, you can hot swap the battery pack. “Hot swapping” means you can safely replace the battery pack without shutting down while your Tablet PC is running on battery power. Hints and Reminders See “Replacing the Battery Pack” for replacement instructions and note the following hints and reminders on hot swapping: Make sure the battery pack to be installed is charged.
Power-Saving Tips Aside from enabling your Tablet PC’s power saving mode, you can do your part to maximize the battery’s operating time by following these suggestions. Do not disable Power Management. Decrease the LCD brightness to the lowest comfortable level. Shorten the length of time before Windows turn off the display. When not using a connected device, disconnect it. Turn off the wireless radio if you are not using the wireless module (such as WLAN, Bluetooth, or WWAN).
Appendix A Specifications NOTE: Specifications are subject to change without any prior notice. Parts Specifications CPU - Intel® Core™ i7-8665U Qual Core, 1.9GHz up to 4.8GHz, 8MB Intel® Smart Cache - Intel® Core™ i7-8565U Qual Core, 1.8GHz up to 4.6GHz, 8MB Intel® Smart Cache - Intel® Core™ i5-8365U Qual Core, 1.6GHz up to 4.1GHz, 6MB Intel® Smart Cache - Intel® Core™ i5-8265U Qual Core, 1.6GHz up to 3.9GHz, 6MB Intel® Smart Cache - Intel® Core™ i3-8145U Dual Core, 2.1GHz up to 3.
Parts Specifications I/O ports USB 3.1, HDMI, combo audio (4-pole TRRS 3.5mm type), Docking, tri antenna passthrough (option) Option I/O (mutually exclusive) One of the below on the top side: Barcode reader / NFC/RFID reader / USB 3.0 / USB 3.0 Type-C / RS232 serial / VGA /RJ-45 / MicroSD card slot LAN (option) Intel® i219-LM Gigabit Network Connection, 10/100/1000 Mbps Ethernet Wireless LAN + Bluetooth Intel 9260NGW 2x2 802.11 AC + Bluetooth 5.
Appendix B Regulatory Information This appendix provides regulatory statements and safety notices on your Tablet PC. NOTE: Marking labels located on the exterior of your Tablet PC indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix. Some notices apply to specific models only.
On the Use of the System Class B Regulations USA Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur.
Safety Notices About the Battery If the battery is mishandled, it may cause fire, smoke or an explosion and the battery’s functionality will be seriously damaged. The safety instructions listed below must be followed. Danger Do not immerse the battery with liquid such as water, sea water or soda. Do not charge/discharge or place the battery in high-temperature (more than 80 °C / 176 °F) locations, such as near a fire, heater, in a car in direct sunlight, etc. Do not use unauthorized chargers.
Caution Do not use the battery where static electricity (more than 100V) exists that might damage the protection circuit of the battery. When children are using the system, parents or adults must ensure that they are using the system and battery correctly. Keep the battery away from flammable materials during charging and discharging. In case lead wires or metal objects come out from the battery, you must seal and insulate them completely.
wertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. FRENCH ATTENTION: II y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du même type ou d’un type équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux instructions du fabricant. Attention (for USA Users) The product that you have purchased contains a rechargeable battery. The battery is recyclable.
On the Use of the RF Device USA and Canada Safety Requirements and Notices IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radio Frequency Interference Requirements and SAR This device meets the government’s requirements for exposure to radio waves.
expense. The user is encouraged to try one or more of the following corrective measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency.
European Union CE Marking and Compliance Notices Statements of Compliance English This product follows the provisions of the European Directive 2014/53/EU. Danish Dette produkt er i overensstemmelse med det europæiske direktiv 2014/53/EU. Dutch Dit product is in navolging van de bepalingen van Europees Directief 2014/53/EU. Finnish Tämä tuote noudattaa EU-direktiivin 2014/53/EU määräyksiä. French Ce produit est conforme aux exigences de la Directive Européenne 2014/53/EU.
Spanish Este producto cumple con las normas del Directivo Europeo 2014/53/EU. Swedish Denna produkt har tillverkats i enlighet med EG-direktiv 2014/53/EU. Notices CE Max power: WLAN 2.4G: dBm WLAN 5G: dBm Bluetooth: dBm WWAN: dBm RFID: dBuA/10m The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
User Notification of Take-back Service To Institutional (B2B) Users in United States: Getac believes in providing our institutional customers with easy-to-use solutions to recycle your Getac-brand products for free. Getac understands the institutional customers will likely be recycling multiple items at once and as such. Getac wants to make the recycling process for these larger shipments as streamlined as possible.
ENERGY STAR 7.0 ENERGY STAR® is a government program that offers businesses and consumers energy-efficient solutions, making it easy to save money while protecting the environment for future generations. Please reference ENERGY STAR® related information from http://www.energystar.gov. As an ENERGY STAR® Partner, Getac Technology Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
Over its lifetime, ENERGY STAR® qualified equipment in a single home office (e.g., computer, monitor, printer, and fax) can save enough electricity to light an entire home for more than 4 years. Power management (“sleep settings”) on computers and monitors can result in much savings annually. Remember, saving energy prevents pollution Because most computer equipment is left on 24 hours a day, power management features are important for saving energy and are an easy way to reduce air pollution.
Battery Recycling For the U.S. and Canada only: To recycle the battery, please go to the RBRC Call2Recycle website or use the Call2Recycle Helpline at 800-822-8837. Call2Recycle® is a product stewardship program providing no-cost battery and cellphone recycling solutions across the U.S. and Canada. Operated by Call2Recycle, Inc., a 501(c)4 nonprofit public service organization, the program is funded by battery and product manufacturers committed to responsible recycling. See more at: http://www.
