User's Manual

62
 Strong Password enables or disables strong password. When enabled, the
password you set must contain at least one upper-case letter, one lower-case
letter, and one digit.

Password Configuration sets the minimum password length. Enter the number
in the input field and select
[Yes]. The number should be between 4 and 64.

Password on Boot allows you to enable or disable the entering of password for
booting up your system.

Secure Boot Configuration You can access this item only after setting the
Supervisor Password.
Secure Boot enables or disables Secure Boot. Secure Boot is a feature that
helps prevent unauthorized firmware, operating systems, or UEFI drivers
from running at boot time.
Delete all Security Boot Keys deletes all secure boot variables.
Restore Factory Defaults resets secure boot variables to manufacturing
defaults.

Set HDD 0 User Password sets the password for locking the Primary Master hard
disk drive. After setting a password, the hard disk drive can only be unlocked
by the password no matter where it is installed.

Security Freeze Lock enables or disables the “Security Freeze Lock” function.
This function is only applicable to SATA drives in AHCI mode. It prevents
attacks on the SATA drive by freezing the security state of the drive at POST
and also when the system resumes from S3.

TPM Setup Menu
TPM Support enables or disables TPM (Trusted Platform Module) support. TPM
(Trusted Platform Module) is a component on your computer’s mainboard that
is specifically designed to enhance platform security by providing a protected
space for key operations and other security critical tasks.
Change TPM Status allows you to select between No Operation and Clear .
 Intel Trusted Execution Technology enables utilization of additional hardware
capabilities provided by Intel® Trusted Execution Technology.
Boot Menu
The Boot menu sets the sequence of the devices to be searched for the operating
system.