User's Manual

80
LAN Problems
I cannot access the network.
 Make sure that the LAN cable is properly connected to the RJ45 connector and
the network hub.
 Make sure that the network configuration is appropriate.
 Make sure that the user name or password is correct.
Power Management Problems
The computer does not enter Sleep or Hibernation mode automatically.
 If you have a connection to another computer, the computer does not enter
Sleep or Hibernation mode if the connection is actively in use.
 Make sure that the Sleep or Hibernation time-out is enabled.
The computer does not enter Sleep or Hibernation mode immediately.
 If the computer is performing an operation, it normally waits for the operation
to finish.
The computer does not resume from Sleep or Hibernation mode.
 The computer automatically enters Sleep or Hibernation mode when the
battery pack is empty. Do any one of the following:
 Connect the AC adapter to the computer.
 Replace the empty battery pack with a fully charged one.
Sensor Problems
The built-in digital compass doesn’t seem to be accurate.
 Rotating the display can affect the accuracy of the digital compass. This is
normal, not a malfunction. The sensors for the compass require periodic
recalibration. Follow this method to recalibrate the sensors:
1. Make sure you are far away from any large metal objects or magnetic fields.
2. Start an application that utilizes the digital compass.
3. Hold the computer level with the horizon, with the LCD side facing up.