User's Manual

51
 To avoid damaging the screen, do not touch it with any sharp object.
 LCD image sticking occurs when a fixed pattern is displayed on the screen for
a prolonged period of time. You can avoid the problem by limiting the amount
of static content on the display. It is recommended that you use a screen saver
or turn off the display when it is not in use.
 To maximize the life of the backlight in the display, allow the backlight to
automatically turn off as a result of power management.
 “Storage Device Retention” service is not available to your Tablet PC model. In
case you have to return your Tablet PC to Getac for replacing the storage
device and you want to completely erase the hard drive data before returning
it, you can use the erasing tool supplied by Getac. For information on the tool,
please contact Getac by any of the below ways.
URL: http://us.getac.com/contact/contact.html
Telephone: [phone]
E-Mail: [e-mail]
Cleaning Guidelines
 Never clean the Tablet PC with its power on.
 Use a soft cloth moistened with water or a non-alkaline detergent to wipe the
exterior of the Tablet PC.
 Gently wipe the display with a soft, lint-free cloth.
 If water or liquid is split onto the Tablet PC, wipe it dry and clean when
possible. Though your Tablet PC is water-proof, do not leave the Tablet PC wet
when you can dry it.
 If the Tablet PC gets wet where the temperature is 0°C (32°F) or below, freeze
damage may occur. Make sure to dry the wet Tablet PC.
Battery Pack Guidelines
 Recharge the battery pack when it is nearly discharged. When recharging, make
sure that the battery pack is fully charged. Doing so may avoid harm to the
battery pack.