User's Manual

Connecting to another Bluetooth Device

1. Make sure that the Bluetooth function is enabled (as described above).

2. Make sure that the target Bluetooth device is turned on, discoverable and within

close range. (See the documentation that came with the Bluetooth device.)

3. Tap  Settings  Devices Bluetooth.

4. Select the device you want to connect from the search results.

5. Depending on the type of Bluetooth device that you want to connect to, you

will need to enter the pertinent information.

For detailed information on using the Bluetooth feature, see Windows’ online Help.

Using the WWAN Feature (Optional)

A WWAN (Wireless Wide Area Network) uses mobile telecommunication cellular

network technologies to transfer data. The WWAN module of your Tablet PC supports

4G LTE.

NOTE:

 Your model only supports data transmission. Voice transmission is not supported.

 For instructions on installing the micro-SIM card, see “Installing the Micro-SIM Card

(Optional)” in Chapter 1.

Turning On/Off the WWAN Radio

To turn on the WWAN radio:

Tap  Settings  Network & Internet  Airplane mode. Slide the Cellular

switch to the On position.

To turn off the WWAN radio:

You can turn off the WWAN radio the same way you turn it on.

If you want to quickly turn off all wireless radio, simply switch on Airplane mode.

Tap  Settings  Network & Internet  Airplane mode. Slide the Airplane

mode switch to the On position.