User's Manual

Using the RFID Reader (Optional)

Select models have an HF RFID reader. The reader can read data from HF (High

Frequency) RFID (Radio Frequency Identification) tags.

The RFID reader is enabled by default. To enable or disable the reader, run the

BIOS Setup program and select Advanced  Device Configuration  RFID Card

Reader. (See Chapter 5 for information on BIOS Setup.)

For optimal results when reading an RFID tag, have the tag face the antenna in

the same orientation as indicated by the icon on the exterior of the Tablet PC.

NOTE:

 When not using an RFID card, do not leave it within or near the antenna area.

 For enhanced applications and customization of the module, contact your authorized

Getac dealer.

RFID antenna area