Owner's Manual

Turning Off/On the WLAN Radio
To turn on the WLAN radio:
1. Make sure that the RF switch is at the ON position.
2. Press Fn+F1 to turn on the WLAN radio (see “Hot Keys” in Chapter 2),
indicated by the WLAN indicator ( ) glowing in green when on.
If you need to temporarily turn off the radio, press Fn+F1. To resume
network connection, press Fn+F1 again.
It takes approximately 30 seconds for your computer to make a successful
WLAN connection and approximately 10 seconds to disconnect.
Connecting to a Wireless Network
To connect to a wireless network:
1. Make sure that the WLAN radio is on (as described in the previous
section) and Windows Mobility Center has Wireless Network turned on
(accessed from Windows Control Panel).
2. Tap the Wireless Network icon on the taskbar. (An orange light in the
icon indicates connections are available.)