Owner's Manual

Using BIOS Setup and System Recovery 5-17
System Recovery
You need to run System Recovery when:
z Your Windows operating system does not start at all.
z You want to restore the factory default Windows settings.
WARNING: Using this feature will reinstall Windows to your system and configure it
to the system’s factory default settings. All data on the hard disk drive will be lost.
To run System Recovery:
1. During system startup when the following screen appears, press Ctrl +
Alt + F2 keys for four seconds or press Enter and select HDI Recovery
when a small window appears on the screen.
2. The message
This will help you reinstall Windows to the whole HDD
to factory default. All data on HDD will be lost appears on the screen
to ask if you want to access System Recovery. Type 1 to continue or type
0 to exit.