Owner's Manual

 Use the Web Manager/Telnet of the Access Point to check whether it is
connected to the network.
 Reconfigure and reset the Access Point.
I cannot access the network.
 Make sure that the network configuration is appropriate.
 Make sure that the user name or password is correct.
 You have moved out of range of the network.
 Turn off power management.
PC Card Problems (Optional)
The PC card does not work.
 Make sure that the PC card is correctly seated.
 If the card requires an IRQ (Interrupt ReQuest), make sure that there is
one available.
The PC card stops communicating properly.
 The application may have been reset when the tablet PC is turned off
or in Standby/Sleep mode. Exit and restart the application.
Power Management Problems
The tablet PC does not enter Standby or Hibernation mode
automatically.
 If you have a connection to another computer, the tablet PC does not
enter Standby or Hibernation mode if the connection is actively in use.
 Make sure that the Standby or Hibernation time-out is enabled.
The tablet PC does not enter Standby or Hibernation mode
immediately.
 If the tablet PC is performing an operation, it normally waits for the
operation to finish.