Owner's Manual
The tablet PC does not resume from Standby or Hibernation mode.
The tablet PC automatically enters Standby or Hibernation mode when
the battery pack is empty. Do any one of the following:
Connect the AC adapter to the tablet PC.
Replace the empty battery pack with a fully charged one.
Software Problems
An application program does not work correctly.
Make sure that the software is correctly installed.
If an error message appears on the screen, consult the software
program’s documentation for further information.
If you are sure the operation has stop, reset the tablet PC. (See
“Resetting the Tablet PC” later in this chapter.)
Sound Problems
No sound is produced.
Make sure that the volume control is not set too low. Increase volume by
pressing the button.
Make sure that the tablet PC is not in Standby mode.
If using an external speaker, make sure that the speaker is properly
connected.
Distorted sound is produced.
Make sure that the volume control is not set too high or too low. In most
cases, a high setting can cause the audio electronics to distort the sound.
The external audio device does not work.
Make sure that your tablet PC is equipped with the driver needed.
Click the speaker symbol on the taskbar and check the Windows volume
control.










