Owner's Manual

BIOS Setup
When to Use BIOS Setup
When to Use
You need to run BIOS Setup Utility when:
 You see an error message on the screen requesting you to run BIOS
Setup Utility.
 You want to restore the factory default BIOS settings.
 You want to modify some specific settings according to the hardware .
 You want to modify some specific settings to optimize the system
performance.
Starting BIOS Setup



To run BIOS Setup utility, press the Ent key when the prompt appears on the
screen during system startup. The prompt shows up on the screen for only a
few seconds. You must press the Ent key quickly. A small window appears,
select Launch System Setup. The BIOS Setup Utility main screen appears as
shown next.