E100 USER’S MANUAL Rugged Mobile Computing Solutions
June 2011 TRADEMARKS The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice. For the latest version of the manual, please visit the Getac website at www.getac.com.
Table of Contents Chapter 1 Getting Started .............................................................1-1 Getting the Tablet PC Running .............................................. 1-2 Unpacking ........................................................................... 1-2 Installing the Battery Pack and Connecting to AC Power1-3 Using the Hand Strap ......................................................... 1-6 Turning On and Off the Tablet PC ....................................
Connecting to another Bluetooth Device ....................... 2-14 Using the 3G Feature (Optional).......................................... 2-17 Installing the SIM Card ..................................................... 2-17 Connecting to 3G Network .............................................. 2-19 Using the Camera (Optional) ............................................... 2-23 Using the Fingerprint Scanner (Optional) ........................... 2-24 Chapter 3 Managing Power ........................
System Recovery .................................................................... 5-10 Chatper 6 Using Special Utilities ...................................................6-1 Using the OSD Control Panel ................................................. 6-2 Quick Button Setup ............................................................ 6-6 Using G-Manager .................................................................... 6-8 Starting G-Manager...........................................................
Display Problems ................................................................. 8-4 Hardware Device Problems ................................................ 8-4 Hard Disk Drive Problems................................................... 8-5 LAN Problems ...................................................................... 8-5 PC Card Problems ................................................................ 8-5 Power Management Problems .......................................... 8-6 Software Problems ..
Chapter 1 Getting Started Congratulations on purchasing this rugged Tablet PC. This chapter first tells you step by step how to get the Tablet PC up and running. Then, you will find a section briefly introducing the external components of the Tablet PC.
Getting the Tablet PC Running Unpacking After unpacking the shipping carton, you should find these standard items: Tablet PC Accessories: AC adapter AC power cord Hand strap Screen protector film (already attached to the screen) Stylus Inspect all the items. If any item is damaged or missing, notify your dealer immediately. Keep the shipping carton and packing materials in case you need to ship or store the Tablet PC in the future.
Installing the Battery Pack and Connecting to AC Power The Tablet PC operates either on the external AC power or internal battery power. It is suggested that you use AC power when starting up the Tablet PC for the very first time. 1. Make sure that the Tablet PC is turned off. 2. Place the Tablet PC upside down. 3. Lift the latch handle of the battery cover and turn it counterclockwise to the unlock position. Then, detach the cover from the Tablet PC.
4. Fit the battery pack into place (). Tightening the two screws () is optional. The lack of the screws will not affect the rugged and waterproof feature of the Tablet PC. 5. Replace the battery cover and turn the latch clockwise to the lock position.
6. Plug the DC cord of the AC adapter to the power connector of the Tablet PC (). Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet (). 7. Power is being supplied from the electrical outlet to the AC adapter and onto your Tablet PC. Now, you are ready to turn on the Tablet PC.
Using the Hand Strap Align the four hooks of the hand strap with the four corresponding holes on the Tablet PC and tighten the screws. The hand strap allows you to firmly hold the Tablet PC by inserting your hand through the hand strap.
Turning On and Off the Tablet PC Turning On Press the power button ( Windows should start. ). The operating system such as Microsoft Turning Off When you finish a working session, you can stop the system by turning off the power or leaving it in Sleep or Hibernation mode: To... Do this... Power off (Shutdown) Use the Windows Start menu in the lower left and follow the shutdown procedure. Sleep Press the power button* or use the Windows Start menu to put the Tablet PC in Sleep mode.
Taking a Look at the Tablet PC Front Components Ref Component Description See Also Touchscreen Displays and receives information for the Tablet PC. P. 2-2 Power Button Turns the power ON and OFF (Sleep mode by default). The green LED beside the button glows when the power is on and blinks when the system is in Sleep mode. P.
Ref Component Description See Also Microphone Receives sound and voice to record voice. Light Sensor Senses the ambient light for automatic adjustments of the display and keypad backlight. The features can be enabled through OSD Control Panel and G-Manager. NOTE: Do not cover the sensor when in use. P. 6-2 P. 6-14 Control Buttons Toggles the Fn keylock ON and OFF. P. 2-7 Toggles the keypad lock ON and OFF. P. 2-7 Toggles the “OSD Control Panel” ON and OFF. P.
Ref Component Hard Disk Drive Description See Also Lights green when hard disk drive is being accessed. Lights red when the optional heater is on during system operation. Blinks red when the optional heater is in an abnormal state. Numeric Keypad Can be one of the below depending on your model: Provides number, Delete, and Enter keys. When Fn keylock is on, the keys provide alternative functions. Cursor-control Keys Serves as the arrow keys.
Rear Components Ref Component Description See Also Camera Lens (optional) Allows you to use the camera function. P. 2-23 Battery Pack Inside is the battery pack that supplies power to your Tablet PC when external power is not connected. P. 3-3 Contains the SIM card slot (optional). Backup Battery (optional) Provides temporary backup power when the main battery pack is removed. The battery will be recharged when AC power is connected. NOTE: This battery is not user-replaceable.
Right-Side Components Ref Component Description See Also Kensington Lock Locks the Tablet PC to a stationary object for security. P. 7-2 Stylus Serves as the input device by tapping on the touchscreen to make selections and enter information. P. 2-2 Tether Hole Stylus tethered to this hole. Left-Side Components Ref Component Description See Also RJ-45 Connector Connects the LAN cable.
Top Components Ref Component Description Smart Card Reader Can be one of the below depending on your model: PC Card Slot Accepts a Smart Card for additional security feature. Accepts a PC card for additional functions. Smart Card Accepts a Smart Card for additional Reader (optional) security feature. None (optional) There is no card slot if your model comes with the backup battery option.
Bottom Components Ref Component Description See Also 3G Pass-through Connector (optional) Connects to the external antenna for 3G transmission. NOTE: Must be connected via a docking station. GPS Pass-through Connector (optional) Connects to the external antenna for GPS receiver. NOTE: Must be connected via a docking station. Docking Connector Connects to the Docking Station (available as an option). P. 4-5 Power Connector P. 1-3 Connects the AC adapter.
Chapter 2 Operating Your Tablet PC This chapter provides information about the use of the Tablet PC. If you are new to Tablet PCs, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your Tablet PC.
Using the Touchscreen The screen of your Tablet PC is touch-sensitive. You can control the location of the cursor/pointer on the screen using your finger or the included stylus to communicate with the Tablet PC.
Here are some common terms that you should know when using the touchscreen: Term Action Click/Point Tap gently on the touchscreen. Double-click Tap twice on the touchscreen rapidly. Drag and drop Press lightly on the touchscreen and move your finger until you reach your destination (drag). Finally, release your finger (drop) when you finish dragging your selection to the destination. The object will drop into the new location.
Gestures ( Actions = finger down; = finger up) Zoom (Pinch) Move two fingers apart/toward each other. Rotate or Move two fingers in opposing directions. -orUse one finger to pivot around another. Press and Tap Descriptions Use zooming to make an item (a photo for example) on the screen larger or smaller. The gesture works in applications that support mouse wheel zooming. Use rotating to move a picture or other item on the screen in a circular direction (clockwise or counterclockwise).
Gestures ( Actions = finger down; = finger up) Twofinger Tap Descriptions The function is defined by applications that support the specific gesture. Tap two fingers at the same time (where the target is in the midpoint between the fingers). Flicks Make quick drag gestures in the desired direction. Flick left or right to navigate back and forward in a browser and other applications. The gesture works in most applications that support back and forward.
Using the Input Panel Use the Input Panel to enter text and perform various keyboard functions. There are two types of Input Panels for you to use in Windows 7: Touch Keyboard allows you to enter text by tapping the keys with your stylus, like pressing the keys on a standard keyboard. Writing Pad allows you to write on the writing pad, like writing on a piece of paper. Your handwriting will be converted into typed text.
Using the Keypad The keypad of your Tablet PC can be divided into three areas: Control buttons Numeric, Delete (Del), and Enter (Ent) keys Cursor-control keys Control Buttons Located on top of the keypad are three control buttons: Fn button toggles the Fn keylock ON and OFF. When ON (indicated by the icon on the taskbar), you can use the alternative functions of the keypad keys (as described in the next two sections). button toggles the keypad lock ON and OFF.
Numeric Keypad with Alternative Functions Shown below is the 12-key numeric keypad with Delete and Enter keys. When the Fn keylock is ON (indicated by the icon on the taskbar), the keys with orange icons provide alternative functions as described below. rotates the screen display by 90 with each press. switches the keypad backlight ON and OFF. switches the sunlight-readable mode ON and OFF. When ON, the display brightness is set to the highest level. serves as the mouse right-click button.
Cursor-Control Keys with Alternative Functions Cursor-control keys control cursor movement. The word “cursor” refers to the indicator on the screen (except for pointer on screen) that lets you know exactly where on your screen anything you type will appear. It can take the form of a vertical or horizontal line, a block, or one of many other shapes. When the Fn keylock is ON (indicated by the icon on the taskbar), the keys with orange icons provide alternative functions as described below.
Using the Network Features Using the LAN The internal 10/100/1000Base-T LAN (Local Area Network) module allows you to connect your Tablet PC to a network. It supports data transfer rate up to 1000 Mbps. To connect the network cable to the LAN module, connect one end of the LAN cable to the RJ-45 connector ( ) on the Tablet PC and the other end to the network hub.
Technology Stated Maximum Throughput (Mbps) 802.11a 11 802.11g 802.11n 54 100 Mbps or more Data Rates (Mbps) 11, 5.5, 2, 1 54, 36, 18, 9 100 ~ 210 Band (GHz) 2.412 ~ 2.462 2.4 2.4 / 5 Modulation Technology OFDM (Orthogonal OFDM (Orthogonal Spatial multiplexing, Frequency Division Frequency Division uses MIMO (multipleMultiplexing) Multiplexing) input multiple-output) Turning On/Off the WLAN Radio 1. Press the Menu button on your Tablet PC to open the OSD Control Panel. 2.
red X. (In case you have previously turned it off in Windows Mobility Center, be sure to turn it on when using the function the next time.) Connecting to a Wireless Network 1. Make sure that the WLAN function is enabled (as described above). 2. Tap the Wireless Network icon on the taskbar. (An orange light in the icon indicates connections are available.) 3. In the list of available wireless networks, select a network, and then click Connect. 4. Some networks require a network security key or passphrase.
Using the Bluetooth Feature (Optional) The Bluetooth technology allows short-range (about 10 meters) wireless communications between devices without requiring a cable connection. Data can be transmitted through walls, pockets and briefcases as long as two devices are within range. The status of the Bluetooth connection is indicated by the Bluetooth icon located in the taskbar. Status Icon Off (blue with red logo) On (blue with white logo).
3. The Bluetooth function is enabled by default, as indicated by the Bluetooth icon on the Windows taskbar. (In case you have previously disabled the function in the Bluetooth utility, be sure to enable it when using the function the next time.) Connecting to another Bluetooth Device 1. Make sure that the Bluetooth function is enabled (as described above). 2. Make sure that the target Bluetooth device is turned on, discoverable and within close range.
4. The Add New Connection Wizard window appears. Select Express Mode (Recommended), and then click Next. 5. Select the device to connect to and click Next.
6. Depending on the type of Bluetooth device that you want to connect to, you will need to enter the pertinent information. For detailed information on using the Bluetooth Utility, see the Bluetooth Utility Help.
Using the 3G Feature (Optional) 3G is the third generation of mobile phone standards and technology after 2G. Services include wide-area wireless voice telephony and broadband wireless data, all in a mobile environment. Unlike IEEE 802.11 networks, 3G networks are “wide area cellular telephone networks” which evolved to incorporate high-speed internet access and video telephony. IEEE 802.11 networks are short range, high-bandwidth networks primarily developed for data.
3. Remove the two screws if existing (). Pull on the ribbon strip to lift the battery pack off the Tablet PC (). 4. Locate the SIM card slot and push the SIM card into the slot. Make sure the beveled corner on the SIM card is facing towards the Tablet PC and that the golden contact area on the card is facing downwards. To remove the SIM card, just push in () the SIM card to pop-out () and remove the card.
5. Replace the battery pack. 6. Replace the battery cover and turn the latch clockwise to the lock position. Connecting to 3G Network Turning On/Off the 3G Radio 1. Press the Menu button on your Tablet PC to open the OSD Control Panel. 2. Click the RF button to switch the wireless radio on/off. The word ON or OFF on the button indicates the current status.
3. Make sure that the 3G Utility (OneClick Internet) has 3G radio turned on. Setting up a 3G Connection To set up a 3G connection for the first time, follow these steps: 1. Make sure that the SIM card is inserted and the 3G function is enabled (as described above). 2. Pull out the 3G antenna. 3. On Windows desktop, double click the OneClick Internet shortcut on Windows desktop. The screen as below appears.
4. If necessary, enter the PIN of your SIM card. 5. If the radio is currently off, click to turn on the radio. 6. Click Settings. You will be in the Profile page. Click profile. to set up a new 7. Enter the required information. Contact your network operator for the correct information. Using the 3G Application Once a new profile has been created, it will appear in the dropdown menu Profiles. You can then select it by clicking Set Profile to use it.
Managing contacts from SIM and Outlook GPS Management (for models having the GPS module)
Using the Camera (Optional) You can use G-Camera to perform the following: Take pictures Record video Path tracking and capture (for models having the GPS module) GPS information and settings (for models having the GPS module)) To start G-camera, double click the G-Camera shortcut icon on the Windows desktop. The camera control panel appears. Click the Shutter button or press Enter to take photos. For detailed descriptions of G-Camera, click the button .
Using the Fingerprint Scanner (Optional) The fingerprint scanner provides a strong authentication mechanism based on fingerprint recognition. You can log on to your computer or sign in to a web site with your fingerprint instead of a password. You can also encrypt files and folders with your fingerprint. To register your fingerprint, click Start All Programs Fingerprint Software Fingerprint Registration. Click the finger you want to register and follow the onscreen instructions to complete.
You can then use the Fingerprint Software to set up how the fingerprint authentication works. For detailed information, click Start All Programs Fingerprint Software Help.
Chapter 3 Managing Power Your Tablet PC operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.
AC Adapter The AC adapter serves as a converter from AC (Alternating Current) to DC (Direct Current) power because your Tablet PC runs on DC power, but an electrical outlet usually provides AC power. It also charges the battery pack when connected to AC power. The adapter operates on any voltage in the range of 100~240 V AC.
Battery Pack The battery pack is the internal power source for the Tablet PC. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the Tablet PC. When your applications often access peripherals, you will experience a shorter operating time. NOTE: Care and maintenance information for the battery is provided in the “Battery Pack Guidelines” section in Chapter 7.
Checking the Battery Level By Operating System You can check the approximate battery level using the battery meter function of the operating system. To read the battery level in Windows, click the battery icon on the taskbar. By Gas Gauge On the exterior side of the battery pack is a gas gauge for displaying the estimated battery charge.
Replacing the Battery Pack If you often rely on battery power for a long period of time while traveling, you may consider the purchase of an additional battery pack from your dealer and keep it with you in a fully charged state as a backup. To replace the battery pack, follow these steps: 1. Make sure that the Tablet PC is not turned on or connected to AC power. (If your model comes with the backup battery option, you can keep the power on when replacing the battery pack.
3. Remove the two screws if existing (). Pull on the ribbon strip to lift the battery pack off the computer (). 4. Fit another battery pack into place. 5. Replace the battery cover and turn the latch clockwise to the lock position. Battery Low Signals and Actions When the battery is low, Windows gives warning messages and the Battery Charge Indicator ( ) blinks red to alert you. Immediately save your data upon Battery Low. The remaining operating time depends on how you are using the Tablet PC.
Power Management Your Tablet PC supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows, power supply to different Tablet PC components is controlled on an as-needed basis. This allows maximum power conservation and performance at the same time. In general, Windows’ power management works in this way: What... When...
Hibernation Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and normally they all have to be closed before the computer can be turned off. When you use the hibernation feature, you do not have to close the applications. The Tablet PC stores the state of your Tablet PC to a file on the hard disk and then shuts down.
Power-Saving Tips Aside from enabling your Tablet PC’s power saving mode (see previous section), you can do your part to maximize the battery’s operating time by following these suggestions. Do not disable Power Management. Decrease the LCD brightness to the lowest comfortable level. Shorten the length of time before Windows turn off the display. Many USB devices use power just by being connected.
Chapter 4 Expanding Your Tablet PC You can expand the capabilities of your Tablet PC by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter.
Using Smart Cards Depending on your model, your Tablet PC has one or two smart card readers. With an embedded microcontroller, smart cards have the unique ability to store large amounts of data, carry out their own on-card functions (e.g., encryption and mutual authentication), and interact intelligently with a smart card reader. To insert a smart card: 1. Locate the smart card reader. 2. Slide the smart card, with its label and embedded computer chip facing up into the slot. To remove a smart card: 1.
Using PC Cards The PC card slot supports type II card and CardBus specifications. To insert a PC card: 1. Locate the PC card slot (the one with the eject button). 2. Slide the PC card, with its label facing up, into the slot until the eject button pops out. Eject button 3. When a new card is seated, the Tablet PC will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove a PC card: 1.
Connecting a USB Device Your Tablet PC has two USB ports for connecting USB devices, such as a digital camera, scanner, printer, modem, and mouse. The USB ports support transfer rates up to 12 MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices. To connect a USB device, simply plug the device cable to one of the USB ).
Connecting a Serial Device Your computer has a serial port for connecting a serial device such as a serial mouse or serial communication device. Follow this procedure to connect a serial device: 1. Make sure the computer is not turned on. 2. Plug the device cable to the serial port. 3. Turn on the computer.
Connecting an Audio Device For higher audio quality, you can send sound through external audio devices such as speakers, headphones, or earphone set using the headphone out connector.
Using the Docking Station Docking Station is available as an option. The device eliminates the hassles of having you connect and disconnect the various cables when carrying your Tablet PC around and allows a variety of peripherals to be connected. 1. Locate the docking connector. 2. Connect the Docking Station to the docking connector. For more detailed information, refer to the operating Instructions of the Docking Station.
Chapter 5 Using BIOS Setup and System Recovery BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the Tablet PC. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the Tablet PC hardware can understand. The BIOS settings are needed by your Tablet PC to identify the types of installed devices and establish special features.
BIOS Setup When and How to Use You need to run BIOS Setup Utility when: You see an error message on the screen requesting you to run BIOS Setup Utility. You want to restore the factory default BIOS settings. You want to modify some specific settings according to the hardware. You want to modify some specific settings to optimize the system performance. To run BIOS Setup utility, press the Ent key when the prompt appears on the screen during system startup.
In general, you can use the arrow keys to move around and + / – keys to change the setup values. Keyboard information can be found at the bottom of the screen. The keypad of your Tablet PC does not provide all the keys for operating the utility. You will need to connect a USB keyboard before running BIOS Setup. (To use the USB keyboard, make sure that the item “Legacy USB Support” under the Main menu is set to Enabled.
Main Menu The Main menu contains the various system settings. Information Main Advanced Security System Time: System Date: [11:33:08] [05/14/2010] Legacy USB Support: [Enabled] Boot Exit Item Specific Help , , or selects field. SATA Controller Mode Option: [Enhanced] SATA AHCI Enable [Enabled] F1 Help Esc Exit ↑↓ Select Item ←→ Select Menu -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit System Time sets the system time.
Advanced Menu The Advanced menu contains the advanced settings.
HDD Preheat keeps the hard disk drive’s temperature above 3oC (37oF) during system shutdown period. When set to Enabled, the optional heater will automatically turn on whenever the hard disk drive’s temperature drops below 3oC (37oF). (The availability of this item depends on your model.) High Temperature Protection enables or disables the hard disk protection against high temperatures. When set to Enabled, a warning message will appear on the screen when the hard disk temperature goes above the safe range.
Security Menu The Security menu contains the security settings, which safeguard your system against unauthorized use. Information Main Advanced Security Supervisor Password Is: Clear Set Supervisor Password [Enter] Enter Current TPM State: Disabled & Deactivated Change TPM State [No Change ] F1 Help Esc Exit ↑↓ Select Item ←→ Select Menu Boot Exit Item Specific Help Supervisor Password controls access to the Setup utility.
Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system. Information Main Advanced Security Boot priority order: 1: USB KEY: 2: SATA HDD: INTEL SSDSA1M080G2GN-(S1) 3: SATA HDD: 4: USB FDC: 5: USB CDROM: 6: USB HDD: 7: PCI BEV: Realtek Boot Agent 8: Excluded from boot order: : Other USB: : PCI: F1 Help Esc Exit ↑↓ Select Item ←→ Select Menu Boot Exit Item Specific Help Keys used to view or configure devices: Up and Down arrows select a device.
Exit Menu The Exit menu displays ways of exiting BIOS Setup Utility. After finishing with your settings, you must save and exit so that the changes can take effect. Information Main Advanced Security Boot Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes F1 Help Esc Exit ↑↓ Select Item ←→ Select Menu Exit Item Specific Help Exit System Setup and save your changes to CMOS.
System Recovery Use System Recovery when: The Windows operating system does not start at all. You want to restore the system to the factory state. To run System Recovery: 1. It is recommended that you connect the AC adapter to ensure power supply throughout the process. 2. During system startup when the following screen appears, press Ctrl + Alt + F2 keys for four seconds or press Ent and select HDI Recovery when a small window appears on the screen.
3. A message appears asking if you want to continue. Type 1 to continue. 4. A warning message appears asking if you accept the terms as shown on the screen. Type 1 to continue. 5. Type 1 again when the next message appears asking for confirmation. 6. The recovery process starts. The screen as below appears. 7. Wait till the process completes. A message will appear asking you to press any key to continue. Press any key for the system to restart. 8. The Windows setup wizard starts.
10. When completed, the system restarts and displays Windows desktop.
Chapter 6 Using Special Utilities Special utilities are provided for enhanced capabilities and management. This chapter describes how to use these utilities.
Using the OSD Control Panel The OSD (On Screen Display) Control Panel provides a user-friendly interface for you to quickly activate or operate certain functions on your Tablet PC with a simple tap of the screen. To open the OSD Control Panel, press the Menu button on your Tablet PC. The following screen appears.
The following table shows the various functions on the OSD Control Panel. Icon Function / Shows the current ON/OFF status of keypad lock. / Shows the current ON/OFF status of Fn keylock. Opens the Help file explaining the OSD Control Panel. Opens the Quick Button Setup menu (refer to the next section for details). Closes the OSD Control Panel. Serves as the master ON/OFF control of the RF radio. The word on the button indicates the current status.
Icon Function Switches the LCD backlight to the next choice (MAX, AUTO, or MANUAL.) The word on the button indicates the current status. When set to MAX, the backlight is adjusted to the highest brightness level. When set to AUTO, the brightness will be automatically adjusted according to the current ambient light. The backlight will return to the default MANUAL setting whenever the computer resumes from Sleep/Hibernation mode or the computer is restarted.
Icon Function Opens the Input Panel by default. You can assign a different function to this button (refer to the next section for details). Allows you to adjust the sound volume by dragging the knob along the bar. Switches the system sound output OFF (mute) and ON. Allows you to adjust the LCD brightness level by dragging the knob along the bar. System enters “black-out” mode by turning off the LCD display, LED indicators, touchscreen, and sound. Press the power button ( “black-out” mode.
Quick Button Setup By default, the five quick buttons on the OSD Control Panel have pre-assigned functions. You can re-define the buttons: 1. Click the Quick Button Setup button ( ) on the OSD control panel and the Quick Button Setup window appears. 2. At the bottom of the screen are the five quick buttons. Click the button you want to change. 3. Depending on the type of task to be associated with the button, click the Open button of the Executed Program or Open Folder type. 4. A dialog box appears.
or 5. You can change the image appearing on the button by clicking the Select Image button. After selecting the image file, the original image on the button will be replaced. 6. Click Set to complete the changes.
Using G-Manager G-Manager is a unified user interface utility that allows you to manage and configure the following: System Battery ECO (economic mode) Light Sensor Ignition Monitoring Antenna GPS Status Starting G-Manager You can start up G-Manager by any of the following methods: Click Start All Programs Getac Utility G-Manager, or icon located on the taskbar until a ring appears. Click and hold the From the small menu that pops up, click G-Manager.
System Tab The System tab provides system information. To view specific information, select the component from the list on the left side of the screen. The information of the selected component will be displayed on the right side of the screen.
Battery Tab The Battery tab allows you to check the battery status and configure the battery. At most two batteries may be supported. Click Battery 1 or Battery 2 to view the information of each battery (if your model has a second battery). % Left Battery Status Battery Information The upper portion of the screen displays the current status of the selected battery.
Charging Mode The lower left portion of the screen allows you to select the charging mode. Normal Mode – The battery will be fully charged. When remaining charge reaches below 95%, then charging will start until it is fully charged. Economy Mode – This mode helps prolong battery life by charging up to 80% of its total capacity only. It is highly recommended if you are using AC power most of the time.
4. Wait till the process is completed. Click Exit when finished. ECO Tab The ECO tab allows you to configure ECO modes (or called power profiles). To put the system into an ECO mode, use the ECO button (one of the buttons in the OSD Control Panel). (See “Using the OSD Control Panel” earlier in this chapter for information.
ECO Information The left portion of the screen lists the available power profiles (Quick, Power Saving, and Work). Each profile is a combination of power settings that results in different power consumptions. To change the settings of a profile, select (highlight) the profile name in the list. Profile Settings The right portion of the screen displays the settings of the current selected profile. You can set up the following items: WWAN (3G), Bluetooth, and WLAN – can be on or off.
Light Sensor Tab The Light Sensor tab allows you configure how the light sensor works. Sensor Mode The left portion of the screen lists the sensor modes: Normal – Light sensor sensitivity is set at normal environment lighting condition. Bright – Light sensor sensitivity is set at bright environment lighting condition (e.g. outdoors). Dark – Light sensor sensitivity is set at dark environment lighting condition (e.g. indoors, storage warehouse, etc.). Click to select a mode.
Environment Illuminance To have the keypad backlight automatically turn on in poor lighting environment, click the checkbox Automatic Keyboard Backlit. Click Apply or OK to save the changes. Antenna Tab The Antenna tab allows you to set if your system will automatically use the external GPS or 3G antenna when connected to the Docking Station. Select the checkbox(es) accordingly. Click Apply or OK to save the changes.
Ignition Tab The Ignition tab allows you to configure how your system works with the vehicle ignition. Ignition Control When your system is connected to the Vehicle Dock (available as an option), you can have your system derive power from the vehicle and have the on/off of the vehicle ignition turn on/off your system. To enable the feature, select the checkbox Ignition Power On. Click Apply or OK to save the changes.
Monitoring Tab The Monitoring tab allows you to configure the monitoring function of G-Manager. Items to Monitor The left portion of the screen lists the items. Click the checkbox before an item to include it as a monitored component. Click Apply or OK to save the changes. Monitoring Options The right portion of the screen allows you to set how the monitored items are displayed and how often the monitoring is updated. Always On Top – allows the monitoring window to remain on top of your display.
Monitoring Interval – sets the frequency of updates on the monitoring window (1/3/5/10/30 seconds or 1/5/30 minutes). Click Apply or OK to save the changes. Starting and Stopping the Monitoring To start monitoring, click START Monitor. The monitoring window similar to the one below appears displaying requested information at specified intervals. To stop monitoring, click the Close button at the upper right corner of the monitoring window or click Stop Monitor on the Monitoring tab page of G-Manager.
GPS Status Tab The GPS Status tab shows the GPS status for models having the GPS module. To start GPS positioning, click Start GPS. The screen displays: Ongoing raw data strings in the Message Log section Overhead satellite positions in the Satellite Map section Signal strength of the satellites in the Signal Indicator section When GPS positioning is completed, the Data Summary section shows the GPS information of the current location. To stop GPS positioning, click Stop GPS.
Chapter 7 Caring for the Tablet PC Taking good care of your Tablet PC will ensure a trouble-free operation and reduce the risk of damage to your Tablet PC. This chapter gives you guidelines covering areas such as protecting, storing, cleaning, and traveling.
Protecting the Tablet PC To safeguard the integrity of your Tablet PC data as well as the Tablet PC itself, you can protect the Tablet PC in several ways as described in this section. Using the Cable Lock You can use a Kensington-type cable lock to protect your Tablet PC against theft. The cable lock is available in computer stores. To use the lock, loop the lock cable around a stationary object such as a table. Insert the lock to the Kensington lock hole and turn the key to secure the lock.
Using an Anti-Virus Strategy You can install a virus-detecting program to monitor potential viruses that could damage your files. Using Action Center (for Windows 7) Action Center alerts you to take action on the following security essentials: Windows Firewall Windows Update Malware Protection (anti-virus, anti-spyware) Others (Internet security, user account control) For detailed information, see Windows’ online Help.
Taking Care of the Tablet PC Location Guidelines For optimal performance, use the Tablet PC where the recommended temperature is between 10 C (50 F) and 35 C (95 F) – actual operating temperature depending on product specifications. Avoid placing the Tablet PC in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust. Do not cover or block any ventilation openings on the Tablet PC.
a screen saver or other software that prevents the power management from working. Cleaning Guidelines z Never clean the Tablet PC with its power on. z Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the Tablet PC. z Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the display. z If water or liquid is split onto the computer, wipe it dry and clean when possible.
Also, charging will not start if the battery pack is not within the allowed temperature range. z It is recommended that you do not charge the battery pack more than once a day. z It is recommended that you charge the battery pack with the Tablet PC’s power off. z To maintain the battery pack’s operating efficiency, store it in a cool dark place removed from the Tablet PC and with 30 % ~ 40 % charge remaining. z Important guidelines when using the battery pack.
z Avoid using excessive force that may cause damage to the display. z Use a soft cloth to remove dirt on the display. The touchscreen surface has a special protective coating that prevents dirt from sticking to it. Not using a soft cloth may cause damage to the special protective coating on the touchscreen surface. To remove hard to remove dirt, blow some steam on the particular area and gently wipe away using a soft cloth. z Turn off the Tablet PC power when cleaning the display.
When Traveling Before traveling with your Tablet PC, make a backup of your hard disk data into flash disks or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure that the battery pack is fully charged. Make sure that the Tablet PC is turned off. Disconnect the AC adapter from the Tablet PC and take it with you. Use the AC adapter as the power source and as a battery-charger. Hand-carry the Tablet PC. Do not check it in as luggage.
Chapter 8 Troubleshooting Tablet PC problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common Tablet PC problems.
Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: Try to isolate which part of the Tablet PC is causing the problem. Make sure that you turn on all peripheral devices before turning on the Tablet PC. If an external device has a problem, make sure that the cable connections are correct and secure. Make sure that the configuration information is properly set in the BIOS Setup program.
Solving Common Problems Battery Problems The battery does not charge (Battery Charge indicator does not light amber). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature. Make sure that the battery pack is installed correctly. Make sure that the battery terminals are clean. The operating time of a fully charged battery becomes shorter.
Make sure that the distance between the two devices are not over 10 meters or that there are no walls or other obstructions between the devices. Make sure that the other device is not in “Hidden” mode. Make sure that both devices are compatible. Display Problems Nothing appears on the screen. During operation, the screen may automatically turn off as a result of power management. Press any key to see if the screen comes back. The brightness level might be too low. Increase the brightness.
For an external device that has its own power switch, make sure that the power is turned on. Hard Disk Drive Problems The hard disk drive error message appears on the screen. The hard disk drive has defects. Ask your dealer for help. The hard disk drive operations seem slow. The data files stored on the hard disk drive may be fragmented. Use a tool such as Window’s Disk Defragmenter to defragment the files. The hard disk drive / heater indicator blinks red.
The PC card stops communicating properly. The application may have been reset when the Tablet PC is turned off or in Sleep mode. Exit and restart the application. Power Management Problems The Tablet PC does not enter Sleep or Hibernation mode automatically. If you have a connection to another computer, the Tablet PC does not enter Sleep or Hibernation mode if the connection is actively in use. Make sure that the Sleep or Hibernation time-out is enabled.
Sound Problems No sound is produced. Make sure that the volume control is not set too low. Increase the volume. Make sure that the sound is not muted. Make sure that the Tablet PC is not in Sleep mode. If using an external speaker, make sure that the speaker is properly connected. Distorted sound is produced. Make sure that the volume control is not set too high or too low. In most cases, a high setting can cause the audio electronics to distort the sound.
When you turn on the Tablet PC, it stops after POST. Reset your Tablet PC. (See “Resetting the Tablet PC” later in this chapter.) Wireless LAN Problems I cannot use the wireless LAN feature. Make sure that the wireless LAN feature is turned on. Transmission quality is poor. Your Tablet PC may be in an out-of-range situation. Move your Tablet PC closer to the Access Point or another wireless LAN device it is associated with.
I cannot communicate with the computer in the network when Infrastructure mode is configured. Make sure that the Access Point your Tablet PC is associated with is powered on and all the LEDs are working properly. If the operating radio channel is in poor quality, change the Access Point and all the wireless station(s) within the BSSID to another radio channel. Your Tablet PC may be in an out-of-range situation. Move your Tablet PC closer to the Access Point it is associated with.
Resetting the Tablet PC You may have to reset (reboot) your Tablet PC on some occasions when an error occurs and the program you are using hangs up. If the Tablet PC operation seems to hang up, first wait. It is possible that the Tablet PC is processing data. Periodically check the hard disk drive in-use indicator, if it flashes irregularly, the program may be accessing data and preventing you from using the keypad.
Appendix A Specifications NOTE: Specifications are subject to change without any prior notice. Parts Specifications CPU Intel® Pine View N450, 512 KB L2 cache, FSB 667 MHz, 1.66 GHz speed, with integrated graphics (Dx9) Chipset Intel® Tiger Point NM10 Express BIOS Phoenix, 1MB Flash EEPROM RAM Up to 2 GB DDR2-667 SO-DIMM DRAM Video Audio Controller Integrated in Pine View Display Panel 8.
Parts Specifications Dimension (LxW× D) 280× 184× 32 mm (11× 7.2× 1.3 inch) Weight 1.4 kg (3.
Appendix B Regulatory Information This appendix provides regulatory statements and safety notices on your Tablet PC.
On the Use of the System Class B Regulations USA Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur.
FINNISH VAROITUS: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan valmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. ENGLISH CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. DEUTSCH VORSICHT: Explosionsgefahr bei unsachgemäß em Austausch der Batterie.
paper or other objects that will reduce cooling. Do not use the AC adapter while it is inside a carrying case. Connect the adapter to a proper power source. The voltage requirements are found on the product case and/or packaging. Do not use the adapter if the cord becomes damaged. Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture.
On the Use of the RF Device USA and Canada Safety Requirements and Notices IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Antenna use: In order to comply with FCC RF exposure limits, low gain integrated antennas should be located at a minimum distance of 20 cm (8 inches) or more from the body of all persons.
EMC Requirements This device uses, generates and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with the limits for a Class B digital device pursuant to Part 15 subpart C of the FCC Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
Canada Radio Frequency Interference Requirements To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé à l'intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal.
Greek To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας 1999/5/EC. Icelandic Þessi vara stenst reglugerð Evró pska Efnahags Bandalagsins nú mer 1999/5/EC. Italian Questo prodotto è conforme alla Direttiva Europea 1999/5/EC. Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC. Portuguese Este produto cumpre com as normas da Diretiva Européia 1999/5/EC. Spanish Este producto cumple con las normas del Directivo Europeo 1999/5/EC.
General European standards dictate maximum radiated transmit power of 100 mW Effective Isotropic Radiated Power (EIRP) and the frequency range 2400 – 2483.5 MHz. Belgium and the Netherlands In Belgium and the Netherlands, the product may not be used outdoors. France Departments in Which the Wireless LAN Module Can Be Used (Indoors Only) The wireless LAN module can currently be used indoors only in the following 38 departments of mainland France.
Departments in Which the Wireless LAN Module’s Maximum EIRP Not Shown in the Previous Table Frequency Ranges (MHz) Indoors Outdoors 2400 – 2446.5 10 mW Not permitted 2446.5 – 2483.5 100 mW 100 mW on private property with Ministry of Defense approval Turning Off the Wireless LAN Radio NOTE: Turning the wireless LAN radio off is not the same as disabling the wireless LAN card. It is not necessary to disable the card to meet the regulatory requirements.
