User's Manual

51
When and How to Use
NOTE:
 The actual setting items on your model may differ from those described
in this chapter.
 The availability of some setting items depends on the Windows version
your computer is running.
You need to run BIOS Setup Utility when:
 You see an error message on the screen requesting you to run BIOS
Setup Utility.
 You want to restore the factory default BIOS settings.
 You want to modify some specific settings according to the hardware.
 You want to modify some specific settings to optimize the system
performance.
To run BIOS Setup Utility:
Method 1
NOTE:
: During system startup when the logo screen appears, tap the
screen or press the Windows Logo button on your Tablet PC. In the pre-boot
menu that appears, select Setup Utility. (Tap with your finger. Stylus is not
supported here.)
 If you don’t want any accidental tapping to invoke the pre-boot menu,
you can disable this method by setting the “Screen Tapping for Boot
Options” item in the BIOS Setup Utility.
 When tapping the screen for operating BIOS Setup, use your finger. The
touching of a stylus tip is not supported in this situation.
 For Windows 10 models, the time period in which you can use the above
method is extremely short. You can use the other method as described
below.
Method 2 (for Windows 10 models only): Tap  Settings  Update &
security  Recovery. Under Advanced startup, tap Restart now. In the boot
options menu, tap Troubleshoot  UEFI Firmware Settings. Tap Restart. In
the pre-boot menu that appears, select Setup Utility.