User's Manual

46
When and How to Use
NOTE:
 The actual setting items on your model may differ from those described in this chapter.
 The availability of some setting items depends on the Windows version your computer
is running.
You need to run BIOS Setup Utility when:
 You see an error message on the screen requesting you to run BIOS Setup
Utility.
 You want to restore the factory default BIOS settings.
 You want to modify some specific settings according to the hardware.
 You want to modify some specific settings to optimize the system performance.
To run BIOS Setup Utility:
Method 1: During system startup when the logo screen appears, tap the screen or
press the Windows Logo button on your Tablet PC. In the pre-boot menu that appears,
select Setup Utility.
NOTE:
 If you don’t want any accidental tapping to invoke the pre-boot menu, you can
disable this method by setting the “Screen Tapping for Boot Options” item in the BIOS
Setup Utility.
 For Windows 10 models, the time period in which you can use the above method
is extremely short. You can use the other method as described below.
Method 2: Tap  Settings  Update & Security  Recovery. Under Advanced
startup, tap Restart now. In the boot options menu, tap Troubleshoot  Advanced
options  UEFI Firmware Settings. Tap Restart.