User's Manual

30
Using Network and Wireless
Connections
Using the LAN
To connect the network cable to the LAN module, connect one end of the LAN
cable to the RJ-45 connector on the computer and the other end to the network
hub.
Using the WLAN
The WLAN (Wireless Local Area Network) module of your computer supports IEEE
802.11a/b/g/n/ac.
Turning On/Off the WLAN Radio
To turn on the WLAN radio:
Click  Settings  Network & Internet  Wi-Fi. Slide the Wi-Fi switch to the
On position.
To turn off the WLAN radio:
You can turn off the WLAN radio the same way you turn it on.
If you want to quickly turn off all wireless radio, simply switch on Airplane mode.
You can control the Airplane mode using one of the below methods.
 Press Fn+F1.
 Use the Airplane Mode button in the OSD Control Panel.
 Click  Settings  Network & Internet  Airplane mode.
Connecting to a WLAN Network
1. Make sure that the WLAN function is enabled (as described above).
2. Click the network icon in the lower right of the task bar.