User's Manual

27
Using the Tether (Optional)
You can purchase a stylus and tether for your computer model. Use the tether to
attach the stylus to the computer.
1. Thread one of the tether’s loop through the hole of the stylus (

), tie a dead
knot at the end (

), and pull the tether (

) so that the knot fills in the hole and
prevents the tether from falling off.
2. Insert the other loop to the tether hole on the computer (

). Then, insert the
stylus through the loop (

) and pull it tight.
3. When not in use, store the stylus in the stylus slot.