User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Computer
- Using the Keyboard
- Using the Touchpad
- Using the Touchscreen (Optional)
- Using Network and Wireless Connections
- Using the Optical Disc Drive (Select Models Only)
- Using the Fingerprint Scanner (Optional)
- Using the RFID Reader (Optional)
- Chapter 3 Managing Power
- Chapter 4 Expanding Your Computer
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Care and Maintenance
- Chapter 8 Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Battery Problems
- Bluetooth Problems
- Display Problems
- DVD Drive Problems
- Fingerprint Scanner Problems
- The following message appears during the fingerprint enrollment process – “Your device is having trouble recognizing you. Make sure your sensor is clean.”
- The following message appears during the fingerprint login process – “Couldn’t recognize that fingerprint. Make sure you’ve set up your fingerprint in Windows Hello.”
- Hardware Device Problems
- Hard Disk Drive Problems
- Keyboard and Touchpad Problems
- LAN Problems
- Power Management Problems
- Software Problems
- Sound Problems
- Startup Problems
- WLAN Problems
- Other Problems
- Resetting the Computer
- System Recovery
- Using the Driver Disc (Optional)
- Appendix A Specifications
- Appendix B Regulatory Information
59
Wake Up Capability specifies events for waking up the system from S3 (Sleep)
state.
Any Key Wakeup From S3 State allows any key to wake up the system from S3
(Sleep) state.
USB Wake Up From S3 allow a USB device activity to wake up the system from
S3 (Sleep) state.
System Policy sets the system performance. When set to Performance, the
CPU always runs at full speed. When set to Balance, the CPU speed changes
according to the current workload, therefore balancing between performance
and power consumption.
AC Initiation sets if connecting AC power will automatically start or resume the
system.
USB Power-off Charging (PowerShare USB) enables or disables the USB charging
feature of the PowerShare USB port. When disabled, the PowerShare USB
port functions as a standard USB 2.0 port. For detailed information on the
PowerShare USB port, see “
Connecting a Device for USB Charging” in
Chapter 4
MAC Address Pass Through allows the system specific MAC address to pass
through a connected dock, meaning the dock specific MAC address will be
overridden by the system specific MAC address. This feature only works for
UEFI PXE boot.
Active Management Technology Support (This item appears only on models
supporting vPro.)
Intel AMT Support enables or disables Intel® Active Management Technology
BIOS extension execution. AMT allows the system administrator to access an
AMT featured computer remotely.
Intel AMT Setup Prompt determines whether the prompt for entering Intel AMT
Setup appears or not during POST. (This item only appears when the
previous item is set to Enabled.)
USB Provisioning of AMT enables or disables the use of a USB key for
provisioning Intel AMT.
Virtualization Technology Setup sets Virtualization Technology parameters.
Intel(R) Virtualization Technology enables or disables Intel® VT (Intel
Virtualization Technology) feature which provides hardware support for
processor virtualization. When enabled, a VMM (Virtual Machine Monitor) can
utilize the additional hardware virtualization capabilities provided by this
technology.
Intel(R) VT for Directed I/O (VT-d) enables or disables VT-d (Intel® Virtualization