User's Manual

68
 LCD image sticking occurs when a fixed pattern is displayed on the screen for
a prolonged period of time. You can avoid the problem by limiting the amount
of static content on the display. It is recommended that you use a screen
saver or turn off the display when it is not in use.
 To maximize the life of the backlight in the display, allow the backlight to
automatically turn off as a result of power management.
Cleaning Guidelines
 Never clean the computer with its power on.
 Use a soft cloth moistened with water or a non-alkaline detergent to wipe the
exterior of the computer.
 Gently wipe the display with a soft, lint-free cloth.
 Dust or grease on the touchpad can affect its sensitivity. Clean the pad by
using adhesive tape to remove the dust and grease on its surface.
 If water or liquid is split onto the computer, wipe it dry and clean when
possible. Though your computer is water-proof, do not leave the computer wet
when you can dry it.
 If the computer gets wet where the temperature is 0°C (32°F) or below, freeze
damage may occur. Make sure to dry the wet computer.
Battery Pack Guidelines
 Recharge the battery pack when it is nearly discharged. When recharging,
make sure that the battery pack is fully charged. Doing so may avoid harm to
the battery pack.
 The battery pack is a consumable product and the following conditions will
shorten its life:
– when frequently charging the battery pack
– when using, charging, or storing in high temperature condition
 To avoid hastening the deterioration of the battery pack thereby prolonging its
useful life, minimize the number of times you charge it so as not to frequently
increase its internal temperature.
 Charge the battery pack between 10 °C ~ 30 °C (50 °F ~ 86 °F) temperature
range. A higher environment temperature will cause the battery pack’s