User's Manual
Table Of Contents
- Chapter 1 Getting Started
- Chapter 2 Operating Your Computer
- Using the Keyboard
- Using the Touchpad
- Using the Touchscreen (Optional)
- Using Network and Wireless Connections
- Using the Optical Disc Drive (Select Models Only)
- Using the Fingerprint Scanner (Optional)
- Using the RFID Reader (Optional)
- Chapter 3 Managing Power
- Chapter 4 Expanding Your Computer
- Chapter 5 Using BIOS Setup
- Chapter 6 Using Getac Software
- Chapter 7 Care and Maintenance
- Chapter 8 Troubleshooting
- Preliminary Checklist
- Solving Common Problems
- Battery Problems
- Bluetooth Problems
- Display Problems
- DVD Drive Problems
- Fingerprint Scanner Problems
- The following message appears during the fingerprint enrollment process – “Your device is having trouble recognizing you. Make sure your sensor is clean.”
- The following message appears during the fingerprint login process – “Couldn’t recognize that fingerprint. Make sure you’ve set up your fingerprint in Windows Hello.”
- Hardware Device Problems
- Hard Disk Drive Problems
- Keyboard and Touchpad Problems
- LAN Problems
- Power Management Problems
- Software Problems
- Sound Problems
- Startup Problems
- WLAN Problems
- Other Problems
- Resetting the Computer
- System Recovery
- Using the Driver Disc (Optional)
- Appendix A Specifications
- Appendix B Regulatory Information
14
Ref
Component
Description
Hard Disk
Blinks green when the computer is accessing the
hard
disk (i.e. the SSD on your computer model).
Airplane
mode
Lights green when the RF radio of any RF feature
(WLAN/Bluetooth/WWAN) is on.
If Airplane mode is
switched on, the light turns off.
P1 button
Toggles Blackout mode on or off.
In Blackout mode, the LCD backlight, keyboard/
button backlight, and LED indicators are all turned off;
and the sound is muted.
Can be changed to a different function using
G-Manager.
P2 button
Toggles the sunlight-readable mode on or off.
In sunlight-readable mode, the LCD brightness is
increased to the highest level.
Can be changed to a different function using
G-Manager.
Power button
Turns the power on or off. (The default “off”
state is
“Sleep mode.”)
Keyboard
Serves as the data input device of the computer.
Select models have one of the below components.
a
HF RFID antenna
Reads data from HF RFID tags.
b
Fingerprint
scanner
Serves as the fingerprint verification, preventing
unauthorized access to your computer.