F110 USER MANUAL
Rugged Mobile Computing Solutions May 2019 TRADEMARKS All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice.
For the latest version of the manual, please visit the Getac website at www.getac.com.
Table of Contents Chapter 1 Getting Started .............................................................. 1 Getting the Tablet PC Running ..................................................... 2 Unpacking ............................................................................... 2 Installing the SIM Card (Optional) and Battery Packs ................ 3 Connecting to AC Power .......................................................... 4 Using the Tether ...................................................
Replacing the Battery Pack ..................................................... 30 Power-Saving Tips ...................................................................... 33 Chapter 4 F110-Ex ........................................................................ 34 Anti-Explosion Protective Covers ................................................ 35 Chapter 5 Expanding Your Tablet PC ............................................ 36 Connecting a USB Device ...............................................
Chapter 9 Troubleshooting .......................................................... 66 Preliminary Checklist .................................................................. 67 Solving Common Problems ........................................................ 68 Battery Problems .................................................................... 68 BT Wireless Transmission Problems ....................................... 68 Display Problems ................................................................
Chapter 1 Getting Started This chapter first tells you step by step how to get the Tablet PC up and running. Then, you will find a section briefly introducing the external components of the Tablet PC.
Getting the Tablet PC Running Unpacking After unpacking the shipping carton, you should find these standard items: F110_G5 Tablet PC AC adapter AC power cord Battery pack x 2 Screen cleaning cloth Stylus Document(s) Tether Driver disc (optional) Inspect all the items. If any item is damage or missing, notify your dealer immediately.
Installing the SIM Card (Optional) and Battery Packs Packs 1. Locate the battery cover. Slide the two small locks outward to the unlocked position ( ) () and then release the latch ( ) () to open the battery cover. 2. Select models only: With the SIM card’s chip side facing up and the beveled corner pointing to the slot, insert the card all the way into the slot. NOTE: To remove the SIM card, just push in the SIM card to pop-out and remove the card.
Then, lift the yellow protection sheet in the battery compartment and plug the battery connector. Battery 1 Battery 2 4. Proceed with the other battery pack. 5. Hold the battery cover at an angle and insert the cover’s small tabs to the corresponding notches on the Tablet PC; then close the cover. Press the four small dots () so that the cover clicks into place. Engage the cover latch ( ) () and slide the two small locks inward to the locked position ( ) ().
NOTE: The battery pack is shipped to you in power saving mode that protects it from charging/discharging. It will get out of the mode to be ready for use when you install the battery pack and connect AC power to the Tablet PC for the very first time. When the AC adapter is connected, it also charges the battery pack. For information on using battery power, see Chapter 3. You must use AC power when starting up the Tablet PC for the very first time. 1.
1. Insert one of the tether’s loop ends through the hole of the stylus (as indicated by below). Then, insert the other end through the first loop (as indicated by below) and pull it tight. 2. Insert the other loop end to the tether hole on the Tablet PC (as indicated by below). Then, insert the stylus end through the loop (as indicated by below) and pull it tight. Turning On and Off the Tablet PC Turning On Press the power button ( ). The Windows operating systemshould start.
NOTE: Tapping the screen during startup may invoke a pre-boot menu (unless the default settings have been changed). If the menu appears, simply select Continue. Turning Off When you finish a working session, you can stop the system by turning off the power or leaving it in Sleep or Hibernation mode: To... Do this... Power off (Shutdown) Tap Sleep Press the power button.* -orTap Hibernate Power Shut down. Power Sleep. By default, this option is not shown in the Start menu.
Taking a Look at the Tablet PC NOTE: Depending on the model you purchased, the appearance of your Tablet PC may not be exactly the same as those shown in this manual. CAUTION: You need to open the protective covers to access the connectors. When not using a connector, make sure to close the cover completely for waterand dust-proof integrity. (Engage the locking mechanism if existing.
Ref Component Description Indicators Power Lights blue when the power is on. Blinks blue when the system is in Sleep mode. Battery Charge Lights amber when the battery is being charged. Lights green when battery charging is completed. Blinks green to indicate the battery’s built-in high temperature protection mechanism is activated. CAUTION: Do not remove the battery during this period. Blinks red (once per second) when the battery’s capacity is below 10%. Blinks red rapidly (once per 0.
Ref Component Description Touchscreen Displays and receives information for the Tablet PC. Windows Logo button Opens or closes the Start menu. NOTE: The hardware buttons (except the power button) can be re-defined using G-Manager. Some of the hardware buttons provide keyboard key functions on “POST/BIOS Setup/Non-ACPI” occasions. (See “Button Functions on Special Occasions” in Appendix A for information.
Rear Components Ref Ref Component Description Tether hole Stylus can be tethered to this hole. Stylus/ digitizer pen Serves as the input device by tapping on the touchscreen to make selections and enter information. Component Battery pack Description Inside are two battery packs.
cover Inside is the SIM card slot (optional). NOTE: The SIM card slot still exists but cannot be used for models without the WWAN module. Camera indicator indicator (optional) Lights up when the camera lens beside it is in use. Flash (optional) Provides extra light when taking pictures. Camera lens lens (optional) Allows you to use the camera function. Speaker Sends out sound and voice from your Tablet PC. RJRJ-45 connector (optional) Connects the LAN cable.
Ref Component Combo audio connector Description Connects a set of headphones or external speakers with amplifier. Supports a headset microphone with 4-pole TRRS 3.5mm jack. HDMI connector Connects a HDMI monitor or TV set. USB 3.1 Gen 2 port Connects a USB device. Top Components Ref Component Description a None Or can be one of the below components depending on your model: b Serial port Connects a serial device. c MicroSD card slot Accepts a microSD card for removable storage media.
e USB 2.0 port Connects a USB device. f Barcode reader lens Scans and reads barcodes. Bottom Components Ref Component Description Power connector Connects the AC adapter. Antenna passassthrough (optional) Connects to the docking station for using external GPS /WWAN/WLAN antenna. GPS WLAN WWAN Docking connector Connects to the docking station (available as an option). Kensington lock Locks the Tablet PC to a stationary object for security.
Chapter 2 Operating Your Tablet PC This chapter provides information about the use of the Tablet PC. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your Tablet PC. CAUTION: Do not expose your skin to the Tablet PC when operating it in a very hot or cold environment. The Tablet PC can get uncomfortably warm when you use it in high temperatures.
Navigating on the Screen The screen of your Tablet PC is touch-sensitive. You can control the location of the cursor/pointer on the screen using the included stylus or your finger to communicate with the Tablet PC. CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the touchscreen. Doing so may damage the touchscreen surface. Use the included stylus or your finger. NOTE: An optical film has been attached to the screen before shipment.
The following table shows how you use the touchscreen to obtain equivalent mouse functions. Equivalent Mouse Function Term/Action Term/Action Tap: Touch the screen once. Click/Point Double-tap: Touch the screen twice rapidly. Double-click Tap and hold: Tap and hold until a popup menu appears. Right-click Drag: Hold the stylus (or finger) on the screen and drag across Drag the screen until reaching your destination.
Gestures ( Actions Actions = finger down; = finger up) Rotate or Move two fingers in opposing directions. -orUse one finger to pivot around another. Press and Tap Descriptions Use rotating to move a picture or other item on the screen in a circular direction (clockwise or counterclockwise). The gesture works in applications that support the specific gesture. Use press and tap to access the shortcut menu. Press on target and tap using a second finger.
Using the Dual Mode Display (Optional) Dual mode display (if your model has the feature) incorporates both touchscreen and digitizer functions. The display is set to Touchscreen mode by default. Touchscreen mode provides all the functionalities that an ordinary touchscreen has. When the Tablet PC receives signals from the digitizer pen, the display automatically switches to Digitizer mode.
Using Network and Wireless Connections Using the LAN (Optional) To connect the network cable to the LAN module (if your model has the feature, connect one end of the LAN cable to the RJ-45 connector on the Tablet PC and the other end to the network hub. The location of the connector depends on your model.
Using the WLAN The WLAN (Wireless Local Area Network) module supports IEEE 802.11ac, compatible with 802.11a/b/g/n. Turning On On/Off /Off the WLAN Radio To turn on the WLAN radio: Tap Settings Network & Internet Wi-Fi. Slide the Wi-Fi switch to the On position. To turn off the WLAN radio: You can turn off the WLAN radio the same way you turn it on. If you want to quickly turn off all wireless radio, simply switch on Airplane mode. Tap Settings Network & Internet Airplane mode.
Using the BT Feature The BT technology allows short-range wireless communications between devices without requiring a cable connection. Data can be transmitted through walls, pockets and briefcases as long as two devices are within range. Turning On/Off the BT Radio To turn on the BT radio: Tap Settings Devices BT. Slide the BT switch to the On position. To turn off the BT radio: You can turn off the BT radio the same way you turn it on.
Using the WWAN Feature (Optional) A WWAN (Wireless Wide Area Network) uses mobile telecommunication cellular network technologies to transfer data. The WWAN module of your Tablet PC supports 3G and 4G LTE. NOTE: Your model only supports data transmission. Voice transmission is not supported. For instructions on installing the SIM card, see “Installing the SIM Card (Optional) and Battery Packs” in Chapter 1.
Using the Fingerprint Scanner (Optional) WARNING: We shall not be liable for any loss or damage whatsoever resulting from your use of the fingerprint scanner or neglect of fingerprint scanner use, or any data loss resulting from such developments as fingerprint authentication malfunctioning. It is not recommended that you use the fingerprint scanner in a belowfreezing temperature. The moisture on your finger can freeze to the scanner’s metal surface when you touch it, resulting in a failed operation.
To enroll your fingerprint: 1. Tap Settings Accounts Sign-in options. 2. On the right side under Fingerprint, tap Set up. 3. Follow the onscreen instructions to complete.
Chapter 3 Managing Power Your Tablet PC operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.
AC Adapter CAUTION: The AC adapter is designed for use with your Tablet PC only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your Tablet PC is for use in the country where you purchased your Tablet PC. If you plan to go overseas with the Tablet PC, consult your dealer for the appropriate power cord. When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the Tablet PC.
Battery Pack Your Tablet PC has two battery packs. The battery pack is the internal power source for the Tablet PC. It is rechargeable using the AC adapter. NOTE: Care and maintenance information for the battery is provided in the “Battery Pack Guidelines” section in Chapter 8. Charging the Battery Pac NOTE: Charging will not start if the battery’s temperature is outside the allowed range, which is between 0 °C (32 °F) and 50 °C (122 °F).
Initializing the Battery Pack You need to initialize a new battery pack before using it for the first time or when the actual operating time of a battery pack is much less than expected. Initializing is the process of fully charging, discharging, and then charging. It can take several hours. A software tool called “Gauge Reset” is provided for the purpose. Use the G-Manager program and select the Battery tab to find the tool.
Battery Low Signals and Actions The battery icon changes appearance to display the current state of the battery. Battery Icon Battery Level Description Discharging The icon shows the charge remaining in 10-percent increments until the charge reaches the low-battery level. Low The battery charge has reached the lowbattery level. Critically low The battery charge has reached the critical battery level. By default, Windows will display a notification and put your Tablet PC into Hibernation.
2. Pull the ribbon strip to lift the battery pack off the compartment. 3. Fit another battery pack into place. Note the orientation of the battery pack. Hold the battery pack at an angle and insert its small tabs to the corresponding notches in the battery compartment. Then, lift the yellow protection sheet in the battery compartment and plug the battery connector. 4. Hold the battery cover at an angle and insert the cover’s small tabs to the corresponding notches on the Tablet PC; then close the cover.
32
PowerPower-Saving Tips Aside from enabling your Tablet PC’s power saving mode, you can do your part to maximize the battery’s operating time by following these suggestions. Do not disable Power Management. Decrease the LCD brightness to the lowest comfortable level. Shorten the length of time before Windows turn off the display. When not using a connected device, disconnect it. Turn off the wireless radio if you are not using the wireless module (such as WLAN, BT, or WWAN).
Chapter 4 F110F110-Ex This chapter provides supplementary information for F110-Ex. Read this chapter if you have this model.
AntiAnti-Explosion Protective Covers F110-Ex is suitable for use in potentially explosive atmospheres (zone 2 and zone 22 - non-conductive dust). All covers must be correctly installed in potentially explosive atmospheres. The battery cover must be secured to F110-Ex with three screws (as indicated below). You can only replace the battery outside the Ex-hazardous area. The bottom I/O cover must be secured to F110-Ex with two screws.
Chapter 5 Expanding Your Tablet PC You can expand the capabilities of your Tablet PC by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter.
Connecting a USB Device Your Tablet PC has a USB 3.1 Gen 2 port for connecting USB devices, such as a digital camera, scanner, printer, modem, and mouse. USB 3.1 Gen 2 supports a transfer rate up to 10 Gbit/s. To unlock the left-side cover: Select models have a second USB port, which supports USB 2.0 (transfer rate is 480 MB/s).
Connecting an Audio Device The audio combo connector is the “4-pole TRRS 3.5mm” type (Apple iPhone Recessed) so you can connect a compatible headset microphone. To unlock the left-side cover: SAFETY WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods.
Connecting an an HDMI Display Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external display monitor to your Tablet PC. Your Tablet PC has an HDMI connector. HDMI (High-Definition Multimedia Interface) is an audio/video interface that transmits uncompressed digital data and therefore delivers true HD quality. To unlock the left-side cover: To switch the display output, use Windows Control Panel or OSD Control Panel.
Connecting a Serial Device (Optional) If your model has the RS232 serial port, you can connect a serial device such as a serial mouse or serial communication device.
Using Smart Cards (Optional) If your model has the smart card reader, you can use smart cards. With an embedded microcontroller, smart cards have the unique ability to store large amounts of data, carry out their own on-card functions (e.g., encryption and mutual authentication), and interact intelligently with a smart card reader. To insert a smart card: 1. Locate the smart card reader. Open the cover. 2. With the embedded computer chip facing front and near the slot, slide the smart card into the slot.
Using the NFC/RFID Reader (Optional) The NFC/RFID reader can read data from NFC (Near Field Communication) and RFID (Radio Frequency Identification) tags. It supports ISO 14443 A/B, MIFARE, ISO 15693, and ISO 18000-3 standards. The NFC/RFID reader is enabled by default. To enable or disable the reader, run the BIOS Setup program and select Advanced Device Configuration RFID Card Reader. (See Chapter 6 for information on BIOS Setup.
Using MicroSD Cards Cards (Optional) If your model has the microSD card reader, you can use microSD cards for removable storage media. To insert a microSD card: 1. Locate the microSD card reader. Open the cover. 2. Align the card with its connector pointing to the slot and the connector side facing back. Slide the card into the slot until it reaches the end. 3. Windows will detect the card and assign it a drive name. 4. Close the cover. To remove a microSD card: 1. Open File Explorer and tap Computer.
Replacing the SSD (Optional) 1. Turn off the Tablet PC and disconnect the AC adapter. 2. Remove the battery packs. 3. To open the SSD cover, push the two locks inwards to the unlocked position (), slide the cover downwards (), and then lift the cover open. 4. Remove the screw. Carefully pull up the ribbon strip to lift the SSD and then unplug it from the system board.
5. Plug the new SSD into place and secure it with the screw. 6. Close the SSD cover. Make sure the locks are engaged. 7. Replace the battery packs.
Chapter 6 Using BIOS Setup BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand. The BIOS settings are needed by your computer to identify the types of installed devices and establish special features. This chapter tells you how to use the BIOS Setup Utility.
When and How How to Use NOTE: The actual setting items on your model may differ from those described in this chapter. The availability of some setting items depends on the Windows version your computer is running. You need to run BIOS Setup Utility when: You see an error message on the screen requesting you to run BIOS Setup Utility. You want to restore the factory default BIOS settings. You want to modify some specific settings according to the hardware.
Menu Descriptions Information Menu The Information menu contains the basic configuration information of the system. There are no user-definable items in this menu. NOTE: The “Asset Tag” information appears when you have entered the asset number for this Tablet PC using the asset management program. The program is provided in the Asset tag folder of the Driver disc. Main Menu The Main menu contains the various system settings. System Date sets the system date. System Time sets the system time.
AC Initiation sets if connecting AC power will automatically start or resume the system. Screen Tapping for Boot Options sets if tapping the screen during startup will invoke the boot options menu which provides access to some pre-boot operations. If disabled, tapping the screen during startup has no effect to the system’s booting process.
portion of your hard disk drive that is set aside by the manufacturer to hold the original image of your system. WARNING: Using this feature will reinstall Windows to your system and configure it to the system’s factory default settings. All data on the hard disk drive will be lost. Make sure that power is not interrupted during the recovery process. An unsuccessful recovery may result in Windows startup problems. Windows RE launches Windows Recovery Environment.
Secure Boot Configuration You can access this item only after setting the Supervisor Password. Password Secure Boot enables or disables Secure Boot. Secure Boot is a feature that helps prevent unauthorized firmware, operating systems, or UEFI drivers from running at boot time. Delete all Security Boot Keys deletes all secure boot variables. Restore Factory Defaults resets secure boot variables to manufacturing defaults.
Exit Menu The Exit menu displays ways of exiting BIOS Setup Utility. After finishing with your settings, you must save and exit so that the changes can take effect. Exit Saving Changes saves the changes you have made and exits BIOS Setup Utility. Exit Discarding Changes exits BIOS Setup Utility without saving the changes you have made. Load Setup Defaults Defaults loads the factory default values for all the items. Discard Changes restores the previous values for all the items.
Chapter 7 Using Getac Software Getac software includes application programs for specific computer components and utility programs for overall management. This chapter briefly introduces the programs.
OSD Control Panel The OSD (On Screen Display) Control Panel provides a user-friendly interface for you to quickly activate or operate certain functions on your Tablet PC with a simple tap of the screen. To open the OSD Control Panel, start the program named OSDC. The following screen appears. Help For detailed information on the program, see the program’s online help.
G-Manager G-Manager allows you to view, manage, and configure several system functions and features. The G-Manager home menu presents four categories. Select a category name to open it. For detailed information, see the program’s online help. Select About Help.
G-Camera (Optional) G-Camera is a geo-tagging camera application. Geographical information can be embedded into JPEG files as EXIF 2.2 metadata. NOTE: G-Camera uses the standard location service of Windows. To start the G-Camera application, select G-Camera. In the middle is the preview window with status display. At the two sides are various buttons. For detailed information on the program, see the program’s online help. Tap Help.
Using the Barcode Reader (Optional) NOTE: For enhanced applications and customization of the module, contact your authorized Getac dealer. If your model has the barcode reader module, you can read barcodes of the following types: Code 39 Code 128 EAN/JAN/UPC GS1 Databar Interleaved 2 of 5 PDF417 QR Code Data Matrix OCR To read barcodes: 1. Start your processing software and open a new or existing file.
NOTE: Improper ambient light and scanning angle can affect the scanning results. 3. Upon a successful scan, the system beeps and the scan light turns off. The decoded barcode data will be entered into your processing software.
Chapter 8 Care and Maintenance Taking good care of your Tablet PC will ensure a trouble-free operation and reduce the risk of damage to your Tablet PC. This chapter gives you guidelines covering areas such as protecting, storing, cleaning, and traveling.
Protecting the Tablet PC To safeguard the integrity of your Tablet PC data as well as the Tablet PC itself, you can protect the Tablet PC in several ways as described in this section. Using Using an AntiAnti-Virus Strategy You can install a virus-detecting program to monitor potential viruses that could damage your files. Using the Cable Lock You can use a Kensington-type cable lock to protect your Tablet PC against theft. The cable lock is available in computer stores.
Taking Care of the Tablet PC Location Guidelines For optimal performance, use the Tablet PC where the recommended temperature is between 0 °C (32 °F) and 55 °C (131 °F). (Actual operating temperature depends on product specifications.) Avoid placing the Tablet PC in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust. Using in extreme environments for long periods can result in product deterioration and a shortened product life.
LCD image sticking occurs when a fixed pattern is displayed on the screen for a prolonged period of time. You can avoid the problem by limiting the amount of static content on the display. It is recommended that you use a screen saver or turn off the display when it is not in use. To maximize the life of the backlight in the display, allow the backlight to automatically turn off as a result of power management. Cleaning Guidelines Never clean the Tablet PC with its power on.
in hot weather condition. Also, charging will not start if the battery pack is not within the allowed temperature range. It is recommended that you do not charge the battery pack more than once a day. It is recommended that you charge the battery pack with the Tablet PC’s power off. To maintain the battery pack’s operating efficiency, store it in a cool dark place removed from the Tablet PC and with 30 % ~ 40 % charge remaining. Important guidelines when using the battery pack.
cloth may cause damage to the special protective coating on the touchscreen surface. Turn off the Tablet PC power when cleaning the display. Cleaning the display with the power on may cause improper operation. Do not use excessive force on the display. Avoid placing objects on top of the display as this may cause the glass to break thereby damaging the display.
When Traveling Traveling Before traveling with your Tablet PC, make a backup of your hard disk data into flash disks or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure that the battery pack is fully charged. Make sure that the Tablet PC is turned off. Make sure that all the connector covers are closed completely to ensure the waterproof integrity. Disconnect the AC adapter from the Tablet PC and take it with you.
Chapter 9 Troubleshooting Computer problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems.
Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: Try to isolate which part of the Tablet PC is causing the problem. Make sure that you turn on all peripheral devices before turning on the Tablet PC. If an external device has a problem, make sure that the cable connections are correct and secure. Make sure that the configuration information is properly set in the BIOS Setup program.
Solving Common Problems Battery Problems The battery does not charge (Battery Charge indicator does not light amber). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature. If the battery doesn’t charge after it has been stored in very low temperatures, try disconnecting and reconnecting the AC adapter to solve the problem. Make sure that the battery pack is installed correctly.
Display Problems Nothing appears on the screen. During operation, the screen may automatically turn off as a result of power management. Press any key to see if the screen comes back. The brightness level might be too low. Increase the brightness. The characters on the screen are dim. Adjust the brightness and/or contrast. The display brightness cannot be increased. As a protection, the display brightness will be fixed at a low level when the surrounding temperature is too high or too low.
For an external device that has its own power switch, make sure that the power is turned on. Power Management Problems The Tablet PC does not enter Sleep or Hibernation mode automatically. If you have a connection to another computer, the Tablet PC does not enter Sleep or Hibernation mode if the connection is actively in use. Make sure that the Sleep or Hibernation time-out is enabled. The Tablet PC does not enter Sleep or Hibernation mode immediately.
Software Problems An application program does not work correctly. Make sure that the software is correctly installed. If an error message appears on the screen, consult the software program’s documentation for further information. If you are sure the operation has stop, reset the Tablet PC. Sound Problems No sound is produced. Make sure that the volume control is not set too low. Increase the volume. Make sure that the sound is not muted.
If using an external speaker, make sure that the speaker is properly connected. Distorted sound is produced. Make sure that the volume control is not set too high or too low. In most cases, a high setting can cause the audio electronics to distort the sound. Startup Problems When you turn on the Tablet PC, it does not respond and the Power Indicator does not light green. If you are using an external AC power, make sure that the AC adapter is correctly and securely connected.
Consult your dealer or an experienced radio technician for help. I cannot connect to another WLAN device. Make sure that the WLAN feature is turned on. Make sure that the SSID setting is the same for every WLAN device in the network. Your Tablet PC is not recognizing changes. Restart the Tablet PC. Make sure that the IP address or subnet mask setting is correct. I cannot communicate with the computer in the network when Infrastructure mode is configured.
Other Problems The date/time is incorrect. Correct the date and time via the operating system or BIOS Setup program. After you have performed everything as described above and still have the incorrect date and time every time you turn on the Tablet PC, the RTC (Real-Time Clock) battery is at the end of its life. Call an authorized dealer to replace the RTC battery. GPS signals drop when they are not supposed to. If your computer is connected to the docking station which has one or more USB 3.1/3.
Resetting the Tablet PC You may have to reset (reboot) your Tablet PC on some occasions when an error occurs and the program you are using hangs up. If you are sure the operation has stopped and you cannot use the “restart” function of the operating system, reset the Tablet PC. Reset the Tablet PC by any one of these methods: Press and hold the P1 button for more than 2 seconds. This opens the CtrlCtrl-AltAlt-Del screen where you can select actions including Restart.
System Recovery Using Windows RE Windows 10 has a recovery environment (Windows RE) that provides recovery, repair, and troubleshooting tools. The tools are referred to as Advanced Startup Options. You can access these options by selecting Settings Update & security. There are several choices: System Restore This option allows you to restore Windows to an earlier point in time if you have created a restore point.
Using Recovery Partition When necessary, you can restore your Windows 10 system to the factory default state by using the “recovery partition” feature. Recovery partition is a portion of your hard disk drive that is set aside by the manufacturer to hold the original image of your system. WARNING: Using this feature will reinstall Windows to your system and configure it to the system’s factory default settings. All data on the hard disk drive will be lost.
Using the Driver Disc (Optional) NOTE: You can download the latest drivers and utilities from Getac website at http://www.getac.com Support. The Driver disc contains drivers and utilities required for specific hardware in your Tablet PC. Since your Tablet PC comes with drivers and utilities pre-installed, you normally do not need to use the Driver disc. In case you want to manually install Windows, you will have to install the drivers and utilities one by one after installing Windows.
Appendix A Specifications NOTE: Specifications are subject to change without any prior notice. Parts Specifications CPU Whiskey Lake U Platform - Intel® Core™ i5-8265U, 1.6GHz up to 3.9GHz, 6M cache - Intel® Core™ i5-8365U, 1.6GHz up to 4.1GHz, 6M cache - Intel® Core™ i7-8565U, 1.8GHz up to 4.6GHz, 8M cache - Intel® Core™ i7-8665U, 1.9GHz up to 4.
Parts Specifications GPS (option) UART Optional discrete GPS WWAN (option) 3G/4G LTE Camera (option) Front: FHD, IR sensor (option) Rear: 8M pixel, autofocus, LED, video capture Security Kensington lock TPM 2.0 Fingerprint scanner (optional) Powe AC adapter Universal 65 W; input: 100∼240 V, 50/60 Hz; output: 19V Battery pack x2 Lithium-ion Prismatic type, 3-cell Dimension (LxW×D) 314 x 207 x 18mm (12.4 × 8.1 × 0.7 inch) Weight 1.
Appendix B Regulatory Information This appendix provides regulatory statements and safety notices on your Tablet PC. NOTE: Marking labels located on the exterior of your Tablet PC indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix. Some notices apply to specific models only.
On the Use of the System Class B Regulations USA Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur.
Safety Notices About the Battery If the battery is mishandled, it may cause fire, smoke or an explosion and the battery’s functionality will be seriously damaged. The safety instructions listed below must be followed. Danger Do not immerse the battery with liquid such as water, sea water or soda. Do not charge/discharge or place the battery in high-temperature (more than 80 °C / 176 °F) locations, such as near a fire, heater, in a car in direct sunlight, etc. Do not use unauthorized chargers.
Caution Do not use the battery where static electricity (more than 100V) exists that might damage the protection circuit of the battery. When children are using the system, parents or adults must ensure that they are using the system and battery correctly. Keep the battery away from flammable materials during charging and discharging. In case lead wires or metal objects come out from the battery, you must seal and insulate them completely.
FRENCH ATTENTION: II y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du même type ou d’un type équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux instructions du fabricant. Attention (for USA Users) The product that you have purchased contains a rechargeable battery. The battery is recyclable.
On the Use of the RF Device USA and Canada Safety Requirements and Notices IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radio Frequency Interference Requirements and SAR This device meets the government’s requirements for exposure to radio waves.
If harmful interference with radio or television reception occurs when the device is turned on, the user must correct the situation at the user’s own expense. The user is encouraged to try one or more of the following corrective measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. L’appareil peut interrompre automatiquement la transmission en cas d’absence d’informations à transmettre ou de panne opérationnelle.
Icelandic Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 2014/53/EU. Italian Questo prodotto è conforme alla Direttiva Europea 2014/53/EU. Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 2014/53/EU. Portuguese Este produto cumpre com as normas da Diretiva Européia 2014/53/EU. Spanish Este producto cumple con las normas del Directivo Europeo 2014/53/EU. Swedish Denna produkt har tillverkats i enlighet med EG-direktiv 2014/53/EU.
recycling of your product will protect human health and the environment.
User Notification of TakeTake-back Service To Institutional (B2B) Users in United States: Getac believes in providing our institutional customers with easy-to-use solutions to recycle your Getac-brand products for free. Getac understands the institutional customers will likely be recycling multiple items at once and as such. Getac wants to make the recycling process for these larger shipments as streamlined as possible.
ENERGY STAR 7.0 ENERGY STAR® is a government program that offers businesses and consumers energy-efficient solutions, making it easy to save money while protecting the environment for future generations. Please reference ENERGY STAR® related information from http://www.energystar.gov. As an ENERGY STAR® Partner, Getac Technology Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
Over its lifetime, ENERGY STAR® qualified equipment in a single home office (e.g., computer, monitor, printer, and fax) can save enough electricity to light an entire home for more than 4 years. Power management (“sleep settings”) on computers and monitors can result in much savings annually. Remember, saving energy prevents pollution Because most computer equipment is left on 24 hours a day, power management features are important for saving energy and are an easy way to reduce air pollution.
Battery Recycling For the U.S. and Canada only: To recycle the battery, please go to the RBRC Call2Recycle website or use the Call2Recycle Helpline at 800-822-8837. Call2Recycle® is a product stewardship program providing no-cost battery and cellphone recycling solutions across the U.S. and Canada. Operated by Call2Recycle, Inc., a 501(c)4 nonprofit public service organization, the program is funded by battery and product manufacturers committed to responsible recycling. See more at: http://www.
About Battery and External Enclosure Replacement Battery The batteries of your product include two battery packs and a button cell (or called RTC battery). All batteries are available from Getac authorized service centers. The battery pack is user-replaceable. Replacement instructions can be found in “Replacing the Battery Pack” in Chapter 3. The button cell must be replaced by Getac authorized service centers. Visit the website at http://us.getac.com/support/support-select.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
