User's Manual

50
portion of your hard disk drive that is set aside by the manufacturer to hold the
original image of your system.
WARNING:
 Using this feature will reinstall Windows to your system and configure it to the
system’s factory default settings. All data on the hard disk drive will be lost.
 Make sure that power is not interrupted during the recovery process. An
unsuccessful recovery may result in Windows startup problems.
 Windows RE launches Windows Recovery Environment. Windows RE (Windows
Recovery Environment) is a recovery environment that provides recovery, repair,
and troubleshooting tools in Windows 10.
Security
SecuritySecurity
Security Menu
MenuMenu
Menu
The Security menu contains the security settings, which safeguard your system
against unauthorized use.
NOTE:
 You can set the user password only when the supervisor password has been
set.
 If both the supervisor and user passwords are set, you can enter any of them
for starting up the system and/or entering BIOS Setup. However, the user
password only allows you to view/change the settings of certain items.
 A password setting is applied right after it is confirmed. To cancel a password,
leave the password empty by pressing the Enter key.
 Set
SetSet
Set Supervisor/User
Supervisor/User Supervisor/User
Supervisor/User Password
PasswordPassword
Password sets the supervisor/user password. You can set the
supervisor/user password to be required for starting up the system and/or
entering BIOS Setup.
 Stro
StroStro
Strong Password
ng Password ng Password
ng Password enables or disables strong password. When enabled, the
password you set must contain at least one upper-case letter, one lower-case
letter, and one digit.
 Password Configuration
Password Configuration Password Configuration
Password Configuration sets the minimum password length. Enter the number in
the input field and select [Yes]
[Yes][Yes]
[Yes]. The number should be between 4 and 64.
 P
PP
Password on Boot
assword on Bootassword on Boot
assword on Boot allows you to enable or disable the entering of password for
booting up your system.