User's Manual

51
 Secure Boot Configuration
Secure Boot Configuration Secure Boot Configuration
Secure Boot Configuration You can access this item only after setting the
Supervisor Password
Supervisor PasswordSupervisor Password
Supervisor Password.
Secure Boot enables or disables Secure Boot. Secure Boot is a feature that helps
prevent unauthorized firmware, operating systems, or UEFI drivers from running
at boot time.
Delete all Security Boot Keys deletes all secure boot variables.
Restore Factory Defaults resets secure boot variables to manufacturing defaults.
 Set HDD
Set HDDSet HDD
Set HDD 0
0 0
0 User
User User
User Password
PasswordPassword
Password sets the password for locking the Primary Master hard
disk drive. After setting a password, the hard disk drive can only be unlocked by
the password no matter where it is installed.
 Security Freeze Lock
Security Freeze LockSecurity Freeze Lock
Security Freeze Lock enables or disables the “Security Freeze Lock” function. This
function is only applicable to SATA drives in AHCI mode. It prevents attacks on
the SATA drive by freezing the security state of the drive at POST and also when
the system resumes from S3.
 TPM Setup Menu
TPM Setup MenuTPM Setup Menu
TPM Setup Menu
TPM Support
TPM SupportTPM Support
TPM Support enables or disables TPM (Trusted Platform Module) support. TPM
(Trusted Platform Module) is a component on your computer’s mainboard that is
specifically designed to enhance platform security by providing a protected
space for key operations and other security critical tasks.
Change
Change Change
Change TPM
TPM TPM
TPM Status
StatusStatus
Status allows you to select between No Operation and Clear.
 Intel Trusted Execution Technology enables utilization of additional hardware
capabilities provided by Intel® Trusted Execution Technology.
Boot Menu
Boot MenuBoot Menu
Boot Menu
The Boot menu sets the sequence of the devices to be searched for the operating
system.
 Boot Type Order determines the boot order. You can rearrange the order by
dragging the boot device name up or down in the list.
 Each boot device can be individually set to On or Off. If you want to exclude a
boot device from the boot order, set the device to Off.