User's Manual
62
LCD image sticking occurs when a fixed pattern is displayed on the screen for a
prolonged period of time. You can avoid the problem by limiting the amount of
static content on the display. It is recommended that you use a screen saver or
turn off the display when it is not in use.
To maximize the life of the backlight in the display, allow the backlight to
automatically turn off as a result of power management.
Cleaning Guidelines
Cleaning GuidelinesCleaning Guidelines
Cleaning Guidelines
Never clean the Tablet PC with its power on.
Use a soft cloth moistened with water or a non-alkaline detergent to wipe the
exterior of the Tablet PC.
Gently wipe the display with a soft, lint-free cloth.
If water or liquid is split onto the Tablet PC, wipe it dry and clean when possible.
Though your Tablet PC is water-proof, do not leave the Tablet PC wet when you
can dry it.
If the Tablet PC gets wet where the temperature is 0° C (32° F) or below, freeze
damage may occur. Make sure to dry the wet Tablet PC.
Battery Pack Guidelines
Battery Pack GuidelinesBattery Pack Guidelines
Battery Pack Guidelines
Recharge the battery pack when it is nearly discharged. When recharging, make
sure that the battery pack is fully charged. Doing so may avoid harm to the battery
pack.
The battery pack is a consumable product and the following conditions will
shorten its life:
– when frequently charging the battery pack
– when using, charging, or storing the battery in high temperature
condition
To avoid hastening the deterioration of the battery pack thereby prolonging its
useful life, minimize the number of times you charge it so as not to frequently
increase its internal temperature.
Charge the battery pack between 10 °C ~ 30 °C (50 °F ~ 86 °F) temperature
range. A higher environment temperature will cause the battery pack’s
temperature to rise. Avoid charging the battery pack inside a closed vehicle and