PS336 USER MANUAL Rugged Mobile Computing Solutions
July 2013 Trademarks Microsoft, Windows, the Windows logo, Windows Media, Outlook and ActiveSync are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft products are licensed to OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. All other brand and product names are trademarks or registered trademarks of their respective companies.
Table of Contents Chapter 1 Getting Started ............................................................. 1-1 Identifying Hardware Components ....................................... 1-1 Front Components .............................................................. 1-1 Back Components ............................................................... 1-6 Top Components ................................................................ 1-7 Bottom Components .......................................................
Entering Information .............................................................. 2-7 Entering Text Using the Input Panel ................................. 2-7 Entering Text Using the Physical Keypad........................ 2-10 Writing or Drawing on the Screen .................................. 2-13 Recording a Message........................................................ 2-13 Securing Your Device ............................................................ 2-15 Locking the Screen .....................
Chapter 4 Managing Your Device ................................................. 4-1 Managing Power..................................................................... 4-1 Low Battery Signals and Actions ....................................... 4-1 Power-Saving Tips ............................................................... 4-2 Battery Hot Swapping ........................................................ 4-3 Customizing Your Device .......................................................
RFID Demo (Select Models Only) ......................................... 6-13 Reading Tags ..................................................................... 6-13 Writing Data to 15693 Tags ............................................. 6-14 Writing Data to Mifare Tags ............................................ 6-14 iv Chapter 7 Getting Connected ........................................................ 7-1 Types of Connections ..............................................................
Chapter 1 Getting Started This chapter introduces you to the external components of your device and guides you through the process of setting up your device for use.
Ref Component Description Mobile Phone Indicator Flashes in blue to indicate that the phone function is switched on (select models only). RF (Radio Frequency) Indicator Flashes in blue to indicate that the Bluetooth radio is on. Flashes in amber to indicate that the WLAN (wireless network) radio is on. Flashes in purple to indicate that the GPS receiver is on. If more than one module is switched on, the indicator changes color in a cyclic way.
Ref Component Description Touchscreen Displays the output of your device and responds to your tapping. Keypad Includes keys for numbers and specific functions. It lights up when a key is pressed. (See the next section for details.) Power Button Turns on or off your device. Microphone Records voices. Serves as the mouthpiece during a call (select models only). Keypad The keypad provides two sets of functions: Default functions as indicated by white icons/text.
Fn lock is off by default. When it is switched on, the icon navigation bar. Default Ref Key Alternative (with Fn Lock) Description Key Send Key Dials or answers a call (select models only). Start Key Arrow Keys -- Extra Key Starts Pictures & Videos (standard models). Moves up, down, left and right within the screen or menu. shows in the Description Opens the Start menu Corresponds to the soft key located immediately Left/Right above the hardware Soft Key key.
Default Ref Key Alternative (with Fn Lock) Description Starts the Camera program and serves as the shutter release button. Key Description – – F5 Key Starts Search. Enters a space. F6 Key Starts File Explorer. Action Key Confirms your selection by pressing, similar to the Enter key on a keyboard. F7 Key Starts Calculator. Numeric Keys Enter numbers by default. Symbol Keys Enter symbols as indicated by the orange icons. (Not available for the Phone program.
Back Components Ref Component Description Stylus Serves as the input device by tapping on the touchscreen to make selections and enter information. RFID Antenna (select models only) Inside is the RFID antenna that reads RFID (Radiofrequency identification) tags. Camera Lens Takes still pictures or records video clips. Flash Provides extra light when taking pictures. Hand Strap Holders The hand strap attaches here.
Ref Component Description Speaker Plays music, sounds and voices. Battery Cover Inside is the battery. Top Components Ref Component Expansion Port Cover Description Inside is the FlexiConn™ Expansion Port (Mini-PCIE type) that allows you to use a Getac proprietary accessory for additional functions. (Contact your sales representative for technical information of FlexiConn™ if needed.
Bottom Components Ref Component Power Connector Serial Port Provides D-sub 9 pins RS232 function. Docking Connector Connects to the office dock (an option). 1-8 Description Connects to the AC adapter. USB OTG (Host & Connects to the USB cable.
Getting Your Device Ready for Use Installing the SIM Card and Battery 1. Lift the latch handle of the battery cover and turn it counterclockwise to the unlock (vertical) position. Then, detach the cover from the device. Unlock position 2. Select models only: Remove the dummy card from the SIM card slot. Slightly push in the card to release it and then pull the card out of the slot.
NOTE: To remove the SIM card, slightly push in the card to release it and then pull the card out of the slot. 3. If you have a microSD card to insert, insert it into the slot. (See “Using an MicroSD” later for more information.) 4. To install the battery, first attach the connector side of the battery to the connector in the compartment and then lower the other side. 5.
NOTE: The battery cover must be locked for normal operation. Your device supports battery hot swap. (See “Battery Hot Swap” in Chapter 4 for information.) Connecting to AC Power and Charging the Battery Be sure to fully charge the battery before using your device for the first time. 1. Fit the converter plug to the AC adapter (). 2. Connect the DC jack end of the AC adapter to your device () and the other end to a wall outlet (). 3. The charge indicator glows in amber when charging is in progress.
CAUTION: For optimal performance of the lithium battery, take note of the following: Use the included AC adapter only. There is no need to fully discharge the battery before charging. You can charge the battery before it is discharged. Do not charge the battery where the temperature is high (e.g. in direct sunlight). As a protection against damage, your device stops charging when the battery’s temperature is extremely high or low.
Quick Help The Home screen provides a getting started item. You can quickly access most-needed settings from here. Tap getting started on the Home screen. Brush left or right to see available items such as ringtone, e-mail, Bluetooth headset, and others. Tap the item you want to set up. To obtain information on using the device, tap View All in the toolbar and Online help & how-to. (Internet connection is required.
NOTE: Before installation, make sure that you have Microsoft Outlook installed on your computer. Connect your device to the computer AFTER Windows Mobile Device Center or ActiveSync is installed. ActiveSync connection problems may occur in some specific cases. They are likely caused by interoperability with desktop firewall applications or applications that manage network traffic. For troubleshooting information, visit the Microsoft web site.
Using Options Using the Tether NOTE: Attach the tether for the stylus to the device before attaching the hand strap. A tether is provided for attaching the stylus to your device. 1. Insert one of the tether’s loop ends through the hole of the stylus (as indicated by below). Then, insert the other end through the first loop (as indicated by below) and pull it tight. 2. Insert the other loop end to the holder on the device (as indicated by below).
Using the Hand Strap NOTE: Attach the tether for the stylus to the device before attaching the hand strap. You can attach the hand strap to your device.
Using an MicroSD Card Your device has a microSD card slot where you can insert a microSD card for removable extra storage. To insert a microSD card: 1. Remove the battery. (Refer to “Installing the SIM Card and Battery” earlier in this chapter.) 2. Insert the card into the slot, with the arrow pointing to the slot (the upper one) and the connector facing the device. NOTE: To remove the microSD card, slightly push the card edge to release it and then pull the card out of the slot. 3.
Chapter 2 Basic Skills This chapter familiarizes you with the basic operations of your device. CAUTION: The device can get uncomfortably warm when you use it in high temperatures. In such a circumstance, please take safety measures (such as wearing gloves) to protect yourself. Prolonged body contact can cause discomfort and potentially a burn.
Turning Off Press and hold the power button for at least 3 seconds to open the Power Options menu. Then tap Turn Off. Another way to turn off the device (bypassing the menu): Press and hold the power button for at least 6 seconds until the device plays a notification sound and turns off. Navigating on the Screen Using the Touchscreen CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the touchscreen. Doing so may damage the touchscreen surface. Use the included stylus or your finger.
Tap Touch the screen once with the stylus to open items and select options. Drag Hold the stylus on the screen and drag across the screen to select text and images. Drag in a list to select multiple items. Tap and hold Tap and hold the stylus on an item to see a list of actions available for that item. On the shortcut menu that appears, tap the action you want to perform. Screen-touch gestures make it easier to navigate your device.
Home Screen The Home screen appears whenever you turn on your device after shutting it down or resume the operation after 4 hours of inactivity. The Home screen provides shortcuts to frequently-used features. It shows information such as your appointments, missed calls, and unread messages, and provides quick access to your music, pictures, and other applications. All items are displayed in a scrollable list and the item in the center is always the active item.
Navigation Bar and Toolbar The Navigation bar is located at the top of the screen. It displays the active program name and indicators for connectivity, volume, power, time, and others. You can tap this bar to set up related items. An example of the Navigation bar: Tap to zoom in the screen. Tap to set time zone, date, and time. Tap to set up various connections. Tap to set up phone. Tap to set power options. Tap to adjust the volume.
Running Programs You can switch from one program to another without closing any program. In addition to running a frequently-used program from the Home screen, you can access any program from the Start menu. To open the Start menu, tap at the leftbottom corner of the screen or press Fn + Start key on your device. The Start menu contains all the program icons. You can brush up or down on the screen to see other program icons. Shortcut Menus With shortcut menus, you can quickly choose an action for an item.
Notifications Your device reminds you in a variety of ways when you have something to do. For example, if you have set up an appointment in Calendar, a task with a due date in Tasks or an alarm in Clock, you will be notified in any of the following ways: A message appears on the screen. A sound, which you can specify, is played. The notification indicator flashes in red. To choose reminder types and sounds for your device, tap Sounds & Notifications.
This appears only if you have installed the input method. Input panel button. Microsoft Keyboard When you use the Microsoft Input panel, your device anticipates the word you are typing or writing and displays it above the Input panel. When you tap the displayed word, it is inserted into your text at the insertion point. The more you use your device, the more words it learns to anticipate. Tap here if this is the right word.
XT9 Keyboard Your device offers XT9 Text Input Software that features large keys and allows you to enter text faster and more easily. You have to install the software before you can use the XP9 input method. Tap XT9 Setup to install it. There are two input modes available: XT9 mode and ABC mode. To use a different mode, tap and hold the @123 or ABC key (at the lower left corner) to display the menu and then tap your selection. Tap to select a mode. Tap and hold to display the menu.
Tap one of the arrow keys to cycle to the previous or next set of number/symbol keys. Tap to switch to letter keys. For detailed information on using and customizing XT9 features, tap and hold the @123 or ABC key (at the lower left corner) to display the menu and then tap Options XT9 Help. Entering Text Using the Physical Keypad The physical keypad on your device works with XT9 Text Input Software to provide text input capability. (You have to install the software first.
Keypad Operation in XT9 Mode XT9 is a smart input mode that allows you to enter words with only one keystroke per letter. Though a key is shared by three to four letters, the XT9 mode can judge from your keystroke combination to predict the word you want to enter. For example, to enter the word day, simply press 329. Key 1 Press to show the list of punctuation marks. Press the key containing the letter you want. A list appears at the bottom of the screen.
Key Function in ABC Mode # Press to enter a space. 0 Press once to enter + and twice to enter 0. Keypad Operation in 12# Mode 12# mode allows you to enter numbers. Key Press to enter the number. ＊ 0~9 Function in 12# Mode Press to return to the previous text input mode. # Press to enter #. Keypad Operation When Pressed Longer The previous descriptions of the three input modes apply to short press of a key.
Writing or Drawing on the Screen In certain programs, such as Notes, you can write or draw on the screen as you do on paper. NOTE: Not all programs support the drawing mode. 1. Tap Draw to enable drawing mode. A check (√) appears before the command. 2. To create a drawing, cross three ruled lines on your first stroke. A drawing box appears. Subsequent strokes in or touching the drawing box become part of the drawing. Drawings that do not cross three ruled lines will be treated as writing.
Indicates an embedded recording.
Securing Your Device Locking the Screen You can lock the screen at any time by tapping in the toolbar of the Start menu. This will not affect the notification messages and incoming calls. To unlock the screen, drag left or right. Drag left or right to unlock. Tap to lock. Settings Lock. When a To set a password for unlocking, tap password is set, you will be asked to enter your password whenever you want to use the device.
Locking Your SIM Card (Select Models Only) You can set a PIN (Personal Identification Number) code to protect your SIM card against unauthorized use. (Your mobile phone network operator may have already set a PIN for the SIM card.) By default, your device does not enable PIN security. To enable the security Settings Personal Phone Security.
Chapter 3 Using the Phone (Select Models Only) This chapter tells you how to use the mobile phone function of your device. About Your Phone Select models are equipped with the HSPA+ (High-Speed Packet Access) module. HSPA+ is an enhanced 3G (third generation) mobile telephony communications protocol. It can operate on 850/900/1800/1900/2100MHz. Switching On or Off the Phone When the device is turned on, the phone is switched on by default.
2. The Wireless Manager screen appears. Tap Phone to switch it from on to off or the other way around. 3. Tap . Starting the Phone Program Start the Phone program by any of the three methods: Press the Send key on the device. Tap Tap the phone item on the Home screen. Tap again if it displays “No New Missed Calls.” Phone. Whenever you start Phone, the Phone screen displays the onscreen keypad. You can tap to hide it. To show the keypad, tap . You can use other programs during a call.
Making a Call There are several ways you can make a call. Dialing a Call 1. When on the Home screen: Press the numeric keys on your device to start entering the phone number. Your device will automatically switch to the Phone program. While in the Phone program: Enter the phone number using the physical or onscreen keypad. 2. As you enter the phone number, the program searches Contacts, Call History, and Speed Dial to find a matching name and/or number.
Making a Call from the Onscreen List Whenever you start the Phone program, the screen lists all recent calls, speed dials, and contacts. If the list contains the number you want to call, you can conveniently select from the list and press the Send key on your device. NOTE: To view a different list on the Phone View and select one of the screen, tap options. Making a Call from Contacts Microsoft Contacts displays your contact information stored both in your device’s memory and on your SIM card. 1.
Making a Call from the Call History List The Call History list displays the calls you made, received or missed. 1. Tap Call History on the onscreen keypad of the Phone program. 2. Do one of the followings to call a person in the Call History list: Select the number to call and then tap or press the Send key on your device. Tap and hold on the number to call and then tap Call in the shortcut menu. Making a Call from Speed Dial If you have created speed dial entries, you can call a person quickly.
Responding to a Call When an incoming call is received, your device rings or vibrates according to the options you have set for the phone. The name and number of the caller are displayed on the pop-up window. If the name of the caller is not in your contact list, only the caller’s phone number is displayed. Answering a Call To answer an incoming call, press the Send key on your device or tap in the toolbar. Rejecting a Call To reject an incoming call, press the End key on your device or tap toolbar.
Operations during a Call Adjusting the Phone Volume CAUTION: Never raise the sound volume level too high when using earphones. An excessive sound volume level could cause damage to your hearing. To adjust the volume during a call, tap the navigation bar and tap Select a volume level before the window disappears. . Using Additional Functions When a call is in progress, you can put a call on hold, create a phone conference, mute your microphone, and more.
Using Call History Call History provides the time and duration of all incoming, outgoing, and missed calls, and a summary of total calls. To access Call History while in the Phone program, tap Call History. Filter to change the Call You can tap History view (All Calls by default). To see the time, date and duration of a call, tap the item on the list to view details. To clear all items on the list, tap All Calls. Delete You can add a phone number in the Call History to Outlook Contacts or SIM Contact.
Using Speed Dial You can create Speed Dials for frequently-called phone numbers so you can dial a number with a single key press. Speed dials can only be created for numbers stored in Contacts. 1. While in the Phone program, tap Speed Dial. 2. Tap New. 3. Tap the desired contact. 4. Enter information as requested. 5. Tap OK to save the setting. NOTE: The first Speed Dial location is reserved for your voice mail.
Checking Your Voice Mail The first position in your speed dial list defaults as your voice mailbox. When you insert your SIM card, your device automatically detects your voice mailbox number and sets it to the first position in your speed dial list. Making an Emergency Call You can use your device to dial the international emergency number 112. This number can normally be used to make an emergency call in any country with or without a SIM card inserted, as long as you are within a mobile phone network.
Customizing Your Phone To access the Phone settings, use one of the methods: Switch to the Phone program and tap Tap Options. Settings Personal Phone. Changing Sounds Settings Scroll left or right to the Sounds page. You can customize phone settings, such as the ring type and ringtone to be used for incoming calls, and the keypad tone to be used when entering phone numbers.
Changing Security Settings Scroll left or right to the Security page. You can protect your phone from unauthorized use. You might be prompted to enter the PIN2 code for specific functions (such as the pre-paid card’s charging counters). Consult your mobile phone network service to check if your SIM card supports PIN2-related functions and services. NOTE: Emergency calls can be placed at any time without requiring a PIN code. Changing Services Settings Scroll left or right to the Services page.
Changing Network Settings Scroll left or right to the Network page. You can view available wireless networks, determine the order in which your phone accesses another network if the current one is unavailable, and specify whether you want to change networks manually or automatically. Changing Band Settings Scroll left or right to the Band page. The settings will be configured automatically according to the SIM card inserted. You can manually change the settings if needed.
Changing Advanced Settings Scroll left or right to the Advanced page. The authentication protocol type is set to “PAP+CHAP” by default. You can manually change the settings if needed.
Chapter 4 Managing Your Device This chapter tells you how to effectively manage power, settings, data and programs of your device. Managing Power A fully charged battery should provide power for up to 6 hours of use. The operating time of a fully charged battery depends on how you are using the device. Some functions, such as using multimedia or operating a microSD card, may consume the battery power considerably.
Power-Saving Tips Follow these suggestions to maximize the battery’s operating time, particularly when you are relying solely on the battery power for extended time periods. Suspend frequently. By default, the screen backlight will automatically dim out and the device will also suspend when it has been idle for a period of time. You can shorten the length of the idle time using Settings System Power Advanced to set up.
Battery Hot Swapping Your device supports battery hot swapping. You can swap the battery without turning off the power Follow this procedure to perform hot battery swapping. 1. Press and hold the power button for at least 3 seconds to open the Power Options menu. Then tap Battery Swap. 2. In the dialog box that pops up, tap Yes. 3. When the Charge/Notification indicator begins to flash in green, replace the battery within 2 minutes.
Customizing Your Device NOTE: Incorrect settings may cause your system to malfunction. Make sure that you fully understand the function of a certain item before any adjustment. You can customize the settings of the device to your own preferences. Tap Settings. The items you can customize are described as follows: Item Description Bluetooth To set up or change the Bluetooth connection. (See “Using the Bluetooth Function” in Chapter 7 for detailed information.
Item Connections Wi-Fi Personal Description To search for wireless networks and configure the wireless network module. (See “Using WLAN (Wireless Local Area Network)” in Chapter 7 for detailed information.) Wireless Manager To change the WLAN, Bluetooth, and Phone radio status. Buttons To assign programs to hardware buttons (F1 to F7 and Extra). To set the repeat rate of the up/down control. Owner To enter your personal information. Information System Phone To customize the phone function.
Item System Description External GPS To configure the GPS hardware settings and manage GPS. Managed Programs To manage the programs you installed. Memory To display the allocation between storage and program memory, to view the memory on the storage card (if installed) and to manually stop a program if it becomes unstable or program memory is low. Power To show the remaining battery power and to set the time for the device to turn off automatically.
Working with Programs and Folders Adding and Removing Programs You can add programs compatible with Windows Embedded Handheld 6.5 to your device by downloading or copying. To manage programs you have installed, tap Managed Programs. Settings System To remove programs you have installed, tap Remove Programs. Settings System Searching and Organizing Information The Search feature on your device helps you quickly locate information. To search a file, tap Search Phone.
Chapter 5 Microsoft Pocket Outlook Microsoft Pocket Outlook includes Calendar, Contacts, Tasks, Notes, and E-mail. You can use these programs individually or together. For example, e-mail addresses stored in Contacts can be used to address e-mail messages in Messaging. Calendar Use Calendar to schedule appointments, including meetings and other events. Appointments for the day can be displayed on the Home screen. Tap to go to today. Tap to display or edit the appointment details.
To create an appointment: 1. Tap calendar and New Appointment on the Home screen. – or – Tap Calendar New Appointment. 2. Enter appointment information. 3. Tap OK to save and return to Calendar. Contacts Use Contacts to maintain a list of people you know. This icon indicates a contact stored in the SIM card. To create a contact: 1. Tap Contacts. 2. Tap . 3. Select a contact type. 4. Tap the first field for entering the name.
Use the Input panel to enter the information and tap OK to complete. 5. Tap another field to enter other information such as phone number and e-mail address. NOTE: You can only set the contact’s name and phone number for a SIM contact. 6. Tap OK to save and return to the contact list. Tasks Use Tasks to keep track of what you have to do. To create a task: 1. Tap Tasks. 2. In Tasks, tap New Task. 3. Using the Input panel, enter a description. 4.
Notes Quickly capture thoughts, reminders, ideas, drawings and phone numbers with Notes. You can create a written note or an audio recording. You can also include a recording in a note. To create a note. 1. Tap Notes. 2. Tap . 3. Create your note by writing, drawing, typing, or recording. 4. Tap OK to save and return to the note list.
E-mail and Text Messages About Accounts E-mail. The account selection screen appears. Tap You can use multiple services to send and receive messages. For different ways of accessing messages, there are different types of account: Text Messages (select models only): This item appears if your model comes with the phone function. Outlook E-mail: This item appears if you have synchronized directly with a Microsoft Exchange Server account or with Microsoft Outlook on your computer.
Reading and Sending E-mails Reading E-mails When you connect to your email server or synchronize with your desktop computer or server, by default, you will receive messages from the last three days only and the first 2 KB of each new message, and not to sync file attachments. The original messages remain on the server or your desktop computer. To read E-mail messages: 1. Tap the e-mail account on the Home screen. – or – Tap E-mail and select the account. 2.
Reading and Sending Text Messages (Select Models Only) Reading Text Messages The Home screen shows if there are new text messages. You can tap the item to view the message. You can also tap Text to open the message list. Sending Text Messages 1. Tap text on the Home screen and tap Compose in the toolbar. – or – Tap Text. Tap New. 2. Enter the phone number of one or more recipients, separating them with a semicolon. To select phone numbers from Contacts, tap To. 3. Enter your message. 4.
Chapter 6 More Programs In addition to Microsoft Pocket Outlook, there are other programs built into your device. This chapter tells you how to use these programs. ActiveSync ActiveSync on your device works with ActiveSync on a Windows XP computer and with Windows Mobile Device Center on a Windows Vista/Windows 7/Windows 8 computer. When you have established the connection between your device and your computer, you can synchronize the information between the two with ActiveSync.
NOTE: In addition to the USB cable, you can also synchronize by using Bluetooth. (See the ActiveSync or Windows Mobile Device Center help on your computer.) Synchronizing Directly with Exchange Server You can increase your productivity when you are away from the office by setting up an account to access e-mail, voice mail, calendar, and contact information from a Microsoft Exchange Server.
PowerPoint Mobile 2010 SharePoint WorkSpace Mobile 2010 Word Mobile 2010 Internet Explorer Tap favorites Internet Explorer on the Home screen or tap Internet Explorer to switch to the program. The IE Mobile Home page appears. Tap to display the Favorites list. Tap the page that you want to view. To visit web pages not included in Favorites, in the address bar that appears at the top of the screen, enter the web address you want .
Pictures & Videos With Pictures & Videos, you can: View pictures and video clips. Send pictures and videos to others. Set a picture as the background on the Home screen. Play slide show. Edit your pictures. To viewing pictures and videos: 1. Tap pictures on the Home screen and All Photos soft button. – or – Tap Pictures & Videos. NOTE: You can quickly view pictures by tapping pictures on the Home screen. Brush left or right to scroll through the pictures.
Camera The Camera program allows you to take pictures and record video clips. Taking Pictures 1. To start the program, press the Pictures & Videos Camera. key on your device or tap The Camera screen appears. Below the display area are indicators of the current status. Display area Current status 2. For camera controls such as brightness and zooming, tap Menu. Menu Items Descriptions Mode Three choices: 1. Normal 2. Burst – Continuous shooting of 5 pictures 3.
Menu Items Descriptions Resolution Nine choices from 160x120 to 2592x1944 (1600x1200 by default) Zoom Available choices depend on the resolution. White Balance Five choices from which you can select one that matches the current light source. Flash Flash on or off. Options Overall settings to the Camera program. Flicker Set to the frequency of the local electrical system (60Hz or 50Hz) for flicker free shooting where electrical lights exist. Night Mode On or off.
Recording Video Clips 1. To start the program, press the Pictures & Videos Camera. key on your device or tap 2. Tap Menu Video to switch to the video mode. Below the display area are indicators of the current status. 3. For recording controls such as brightness and white balancing, tap Menu. Menu Items Descriptions Brightness Seven brightness levels Quality 352 x 288 White Balance Five choices from which you can select one that matches the current light source.
5. To stop, press the key or tap Stop. Or, the recording will automatically stop when the length reaches the pre-defined maximum value (30 seconds by default). 6. The video clip is saved to the predefined storage location. To view the video clip, tap Thumbnails. Camera Controls and Options While taking pictures or recording video clips, you can tap Menu to use a function that meets your specific need. For one time overall settings to the Camera program, tap Menu Options. Make the necessary changes.
E-Compass The E-Compass program shows directions of movement including heading, pitch angle, roll angle, and altitude. Reading and Calibrating the Compass To run the program, tap E-Compass. Each time you start the program, you’ll be requested to calibrate the compass. Hold the device in your palm and swing it in the way as shown in the small popup window on the screen. Do this several times until the popup window disappears.
Avoid playing the MP3 music with the internal speaker or connecting the AC adapter. This will cause the magnetic interference to the compass. Regularly set the reference altitude for an accurate output. (See the next section.) Compass Settings The value of altitude is adjusted according to the change in the ambient pressure. It is important that you regularly set the reference altitude because the compass needs an appropriate starting point (altitude versus ambient pressure) for future adjustments.
TacLink The TacLink program receives GPS satellite signals to calculate the location of your device. You can also record a NMEA log file for the use of other applications. NOTE: TacLink only supports NMEA format. TacLink will not start if you Settings have set the GPS output format to Binary Mode in System External GPS Mode for the need of third party programs. Running TacLink To run the program, tap TacLink. A red X indicates logging is not activated. No X indicates logging is activated.
NMEA Log To start logging, tap Setting Log Start. To stop, tap Setting Log Stop. For each logging section, new data is added to the end of the existing data in the same file. By default, the log file is named “GeTACGPSLog” and saved to “My Documents” folder on your device. To specify a different name and location for file, tap Setting Log File. SBAS Settings SBAS (WAAS, MSAS, ENGOS) provides additional accuracy and reliability for the GPS devices.
RFID Demo (Select Models Only) RFID Demo is a demo program that can read UID numbers from RFID tags and write data to RFID tags. The tag types supported are ISO15693, ISO14443A, ISO14443B and Mifare S50/S70. NOTE: For enhanced applications and customization of the RFID module, contact your authorized Getac dealer. To run the program, press the Extra key on your device or tap Demo. RFID Reading Tags 1. Start RFID Demo. The first page is UID. 2. The COM port has been set to COM7 and should not be changed.
Writing Data to 15693 Tags 1. Start RFID Demo. Tap the 15693 tab. 2. Tap SetProtocol to specify 15693 as the target. 3. Bring the tag near the RFID antenna. Tap CheckUID to obtain the UID of the tag. 4. Enter the block number you want to read data from. Tap Read Block. The data of the block is displayed in the data area. 5. Enter the block number and the data you want to write to the block. Tap Write Block. 6. You can tap Clear to clear the data area. Writing Data to Mifare Tags 1. Start RFID Demo.
Chapter 7 Getting Connected This chapter tells you how you can get your device connected through a variety of ways. Types of Connections Your device can connect to the Internet, to your computer, and to other devices and services. Your device has two groups of connection settings: My ISP and My Work Network. My ISP settings connect your device to the Internet, and My Work Network settings connect to any private network, such as an intranet that you use at work.
Using Cellular Connection (Select Models Only) Models supporting mobile phone functions allow you to access the Internet using the mobile network. Setting up a Cellular (GPRS) Connection NOTE: You must subscribe to GPRS service with your mobile operator. In most cases, your cellular (GPRS) connection will be preconfigured by your cellular service provider. You will not have to set up a GPRS connection or change your GPRS settings.
Setting up a Dial-up Connection NOTE: Depending on your wireless service provider, dial-up connections may not be supported on your device. With dial-up, your service provider gives you a phone number that you dial in order to connect your device to the Internet. 1. Tap Settings Connections Connections. 2. In either group, tap Add a new modem connection. 3. In the Enter a name for the connection field, enter a name for the connection. 4.
Using WLAN (Wireless Local Area Network) Switching On or Off the WLAN Radio By default, the WLAN radio is switched off. To switch on or off the WLAN radio: Settings Connections 1. Tap Wireless Manager. 2. In the Wireless Manager screen, tap WLAN to change the WLAN radio status. When switched on, your device will display the word Available if wireless networks are detected.
4. Select to connect to the Internet or the private network, and then tap Connect. 5. If the selected network requires a network key, enter the key and tap Connect. icon appears on the navigation bar The and the RF indicator on your device flashes in amber. NOTE: When you have finished using the wireless network, end the WLAN connection by switching off its radio. Leaving the radio on will consume more power.
3. For other devices to detect your device, tap Menu Bluetooth Settings Mode Make this device visible to other devices. 4. Tap OK. NOTE: When not using the Bluetooth function, switch off the Bluetooth radio. Leaving the radio on will consume more power. Sending Files via the Bluetooth Function 1. Switch on the Bluetooth radio. (See “Switching On or Off the Bluetooth Radio” previously.) 2.
Creating a Bluetooth Partnership NOTE: Getac does not guarantee the product’s compatibilities with the Bluetooth headsets/devices from all manufacturers. To know the Bluetooth profiles that your device supports, tap Settings Bluetooth About Profiles. A partnership is a relationship that you create between your device and another device with Bluetooth capabilities to help exchange information in a secure manner. 1. Make sure that the two devices are switched on, visible, and within close range.
Chapter 8 Troubleshooting and Maintenance This chapter gives solutions to common device problems you may encounter. It also provides guidelines on taking care of your device. Resetting Your Device Occasionally, you may need to reset your device. For example, you should reset your device when it stops responding; or appears to be “frozen” or “locked up.” Reset the device by any one of these methods: Press and hold the power button for at least 3 seconds to open the Power Options menu. Then tap Restart.
Restoring Factory Default State In some cases, you may need to restore your device to the factory default state by clearing the memory from your device. For example, you should clear the memory: When your device does not respond after being restarted. When you forget your password. Clearing the memory means all data you have entered in your device’s memory, including all files, system settings and additional programs you have installed, will be erased.
Troubleshooting NOTE: If you encounter a problem you cannot solve, contact your dealer for assistance. Problem Solution Power does not switch on when using battery power. The remaining battery power may be too low to run your device. Charge the battery. Screen responds slowly. Make sure that your device is not running out of battery power. If the problem still persists, restart your device. Screen freezes. Restart your device. Cannot establish a connection with a computer via USB.
Problem A warning message of not enough memory appears. Solution Delete files you no longer need. Remove programs you no longer need. Delete all files and clear history in Internet Explorer. Stop programs you are not currently using. To check the state of your active programs, tap Settings System Task Manager. Restart your device. Caring for Your Device Taking good care of your device will ensure trouble-free operation and reduce the risk of damage to your device.
Never clean your device with it powered on. Use a soft, lint-free cloth to wipe the screen and the exterior of your device. Do not use paper towels to clean the screen. Never attempt to disassemble, repair or make any modifications to your device. Disassembly, modification or any attempt at repair could cause damage to your device and even bodily injury or property damage and will void the warranty.
Chapter 9 Regulatory Information This chapter provides regulatory statements and safety notices on your device. NOTE: Marking labels located on the exterior of your device indicate the regulations that your model complies with. Please check the marking labels on your device and refer to the corresponding statements in this chapter. Some notices apply to specific models only.
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Safety Precautions Prolonged listening of music in maximum volume can damage the ears. The use of headphones other than those recommended/supplied can cause hearing impairment due to excessive sound pressure.
Connect the charger to a proper power source. The voltage and grounding requirements are found on the product case and/or packaging. Do not use the charger if the cord becomes damaged. Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. About the Battery Use a specified charger approved by the manufacturer. Do not mutilate, puncture, or dispose of battery in fire.
required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the device as reported to the FCC is 0.374 W/kg (for the 3G model) or 0.116 W/kg (for the non-3G model). While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement.
