Owner's Manual

More Programs 6-11

TacLink

The TacLink program receives GPS satellite signals to calculate the location

of your device. You can also record a NMEA log file for the use of other

applications.

NOTE: TacLink only supports NMEA format. TacLink will not start if you

have set the GPS output format to Binary Mode in

 Settings 

System  External GPS  Mode for the need of third party programs.

Running TacLink

To run the program, tap  TacLink.

A message appears if positioning is not completed in 10 minutes.

To exit the program, tap Exit at the bottom left of the screen.

hows the overhead

satellite positions.

Shows the signal

strength

of the satellite

Shows the result of GPS

positioning. A minimum

of 4 GPS satellite signals is

needed to calculate your

GPS position.

A red X indicates logging is not

activated. No X indicates logging is

activated.

This icon appears only if

SBAS is enabled. (See the

next section for

information.)