Owner's Manual

More Programs 6-13
RFID Demo (Select Models Only)
RFID Demo is a demo program that can read UID numbers from RFID tags
and write data to RFID tags. The tag types supported are ISO15693,
ISO14443A, ISO14443B and Mifare S50/S70.
NOTE: For enhanced applications and customization of the RFID module,
contact your authorized Getac dealer.
To run the program, press the Extra key on your device or tap  RFID
Demo.
Reading Tags
1. Start RFID Demo. The first page is UID.
2. The COM port has been set to COM7 and should not be changed.
3. Select a tag type to read (15693, 14443A,
or 14443B).
4. Tap Start to begin reading.
5. Bring the tag near the RFID antenna.
If a tag of the matching type is found, its UID is displayed in the data area.
6. To stop the reading session, tap Stop.
7. You can tap Clear to clear the data area.
Location of
internal RFID
antenna