User's Manual

Getting Your Device Ready for Use

Installing the SIM Card (Select Models Only)

1. Loosen the screw and flip open the cover.

2. With the SIM card’s chip side facing the back of the device and the beveled

corner pointing to the slot, insert the card all the way into the slot.

NOTE: To remove the SIM card, slightly push in the card to release it and then

pull the card out of the slot.

3. Close the cover and tighten the screw.

4. If you insert a SIM card when the device power is off, the device will

detect it and configure the matching firmware when you next start up

the device.

If you insert a SIM card when the device power is on, the device will

detect it and configure the matching firmware. Wait till the process is

completed. Never turn off or restart the device during the process.