User's Manual

9. Tap the cell that contains the text string you want to enter.

To cancel the operation or start a new scan, tap .

10. When finished using the tool, tap X to close the scan window.

Using the Barcode Scanner

Barcode Scanner is a barcode scanning and decoding tool. It can scan barcodes

with either the rear camera or the barcode scanner lens (select models only).

NOTE: Most common 1D and 2D symbologies are supported.

Quick QR Code Scanning (Select Models Only)

If your model has the barcode scanner lens, you can quickly scan an QR code

for accessing the website.

1. Go to the Home screen.

2. Press the Fn button (defined as Trigger by default) on your device.

3. Aim the scan beam at the barcode. Adjust the lens’ distance from the

barcode, shorter for a smaller barcode and farther for a larger one.

NOTE:

 The scan beam will light up with a slight delay because it is initiated from the

power off state each time.

 The scan beam projected from the lens varies with models. The below

illustration shows two examples.

Trigger

button

- or -

4. Upon a successful scan, the scan beam turns off and the decoded

barcode data is entered in the Google Search bar.