Owner's Manual

2-26
Operating Your Computer
2. To turn on the Bluetooth radio, click the Bluetooth button in the Quick
Bar as shown below (an X over the button means the radio is currently
off.)
NOTE: To open the Quick Bar, press the P2 button on your computer or
right-click the Getac Utility icon (
) located on Windows taskbar and
select Quick Bar.
3. The Bluetooth function is enabled by default, as indicated by the
Bluetooth icon
on the Windows taskbar. (In case you have previously
disabled the function in the Bluetooth utility, be sure to enable it when
using the function the next time.).
To turn off the Bluetooth radio:
You can turn off the Bluetooth radio by using the Quick Bar or Bluetooth
utility.
If you want to turn off all wireless radio, slide the RF switch to the OFF
position.
Connecting to another Bluetooth Device
1. Make sure that the Bluetooth function is enabled (as described above).
2. Make sure that the target Bluetooth device is turned on, discoverable
and within close range. (See the documentation that came with the
Bluetooth device.)