Quick Start Manual

 7
2 . Installing an Add-on Card
1. Detach the bottom cover from the Expansion Unit. (Refer to step 6 in
the previous section.)
2. Only for PCI Expansion Unit:
Detach the PCI card holder. (Refer to step 7 in the previous section.)
3. Depending on which slot you want to use, remove its bracket by
unfastening two screws. (Refer to step 7 in the previous section.)
4. Align and attach the bracket to the add-on card’s bracket and tighten
one screw.
5. Align the add-on card’s connector with the slot and press firmly until
the connector is engaged. Secure the bracket with two screws (the
screws from step 3).