Build For Luxury Life INSTALLATION MANUAL
Do Not Return Product to the Store. Contact GETPRO® service team with any questions 1 www.getprohome.com E-mail:service@getprohome.
Build for Luxury Life www.getprohome.com E-mail:service@getprohome.
TOOLS REQUIED/OUTILS TOOLS REQUIED REQUIS 1/4" & 1/8" Drill Bits Mallet Pencil Power Drill level Tape Measure Safety Goggles HARDWARE LIST ITEM 3 REFERENCE IMAGE NAME QTY 1 Glass 2 2 Screw ST4*35 4 3 Wall Anchor 4 www.getprohome.com E-mail:service@getprohome.
Build for Luxury Life Step 1 Tape Measure Use the tape measure to survey the height from the installa�on hole to the wash basin and the width between the two holes, then draw the horizontal and the ver�cal line. www.getprohome.com E-mail:service@getprohome.
Build for Luxury Life Step 2 Drill the hole and inject the green rubber pellets 3 x3 Step 3 Drive in the screw cross the bo�om support. Wall 4 x2 5 www.getprohome.com E-mail:service@getprohome.
Build for Luxury Life Step 4 Hang the mirror on the support. www.getprohome.com E-mail:service@getprohome.
Build for Luxury Life Step 7 5 The assembly is done. You can connect the wall supply and be rest assured to use the mirror. www.getprohome.com E-mail:service@getprohome.
Build for Luxury Life Step 6 Install the glass shelf. Adjust the height according to your preference. The opening of the mirror cabinet door is 165° 165° www.getprohome.com E-mail:service@getprohome.
Build for Luxury Life Step 7 You can choose the height according to your preference Pull out the original small accessories Insert suppor�ng parts 9 www.getprohome.com E-mail:service@getprohome.
Build for Luxury Life A�er power on, the bu�on shows blue and it is in wai�ng state Click the light bu�on to turn on and the color changes to white Click again to change the light color Click the fourth �me to turn off the light Long press to make the light gradually dims Long press again and the light gradually brightens A�er power on, the bu�on shows blue and it is in wai�ng state lick to turn on the defogging func�on and the bu�on turn to white Click again to turn off the defogging func�on and the bu�on