User manual

20 |G3 – Owner’s Manual

Cymbal Type

Components

Trigger Type

(Trigger Settings)

1-Zone cymbals

Edge

None

Single/Dual

2-Zone cymbals

Bow |Edge

None

Dual

3-Zone cymbals without

separate bell output

Bow|Edge|Bell

None

Dual

3-Zone cymbals with sepa-

rate bell output

Bow|Edge

Bell

3-Way

NOTE

For the correct operation of cymbals from other manufacturers, select the appropri-

ate trigger type in the module (Look at “Trigger Settings“ in the owners manual)

3.1.2.3 ANALOG CYMBAL PADS WITH SEPARATE OUTPUT FOR THE BELL

Cymbal pads with their own output for the bell can be connected to GEWA modules in various ways. See the table

below for all possible combinations of Bow/Edge and Bell input channel assignments:

GEWA input assignments for cymbals with separate bell channel

Cymbal components (sensor)

Bow/Edge

Bell

Input (Input

channel)

Aux 1

Aux 2

NOTE

Cymbals with a separate bell socket require 3-Way trigger type. The setting is made in the

trigger settings on the Bow/Edge input channel. (AUX1-channel). (Look at “Trigger Settings“ in

the owners manual)

Connect other analog pads according to the labelling of the trigger inputs on the back of the module.