User manual

VIII |G3 Owner’s Manual
Please keep your digital drum console in a dry environment.
Audio accessories for audio playback (connected to the in- or output of the console) or for data communi-
cation can be connected. Accessories must match the relevant technical specifications (see “Technical Da-
ta” section).
Only and always use GEWA certified power adapters, and make sure that they are properly attached and
connected. The power supply used must also meet the country’s voltage specifications (check plate on the
adapter).
The digital drum set is only to be used as originally delivered. Any modifications to the drum set are not al-
lowed and result in a complete loss of warranty.
The digital drum set must be set up on a safe, weight-bearing, stable and even ground or platform able to
support the weight (please therefore see “Technical Data” section).
1.4 IMPROPER USE (EXAMPLES)
Exposing the digital drum console to an open air or moist/rainy environment.
Setting up the digital drum set in damp rooms.
Using power supplies not authorized by GEWA music or connecting the console to an electrical outlet de-
spite mismatching local voltage specifications.
Playing the digital drum set close to electrical or electronic devices, such as stereo systems, TV sets, radios
or mobile phones. These devices can cause interference and seriously effect and decrease the sound quali-
ty of your GEWA digital drum set.
Using extensively long audio leads can likewise interfere with the sound quality.
Transport and setup up in conjunction with strong vibrations and shocks, dust and heat exposure (e.g.in
vehicles or direct sunshine or both), should also definitely be avoided.
Playing on the display with drumsticks or other solid objects can damage the protective glass. Only use
your fingers and ensure enough distance between the module and the connected equipment.
The manufacturer cannot be held liable in case of damages in the following cases:
Non-compliance with the safety instructions
Improper handling
Connecting incompatible in/output devices etc. or other 3rd party interface devices.